In the work, conducting experimental works and experiments on the choice of optimal ratios of PTCs 1-100 and hydrophobic material «Ramsinks-2MU», studying hydrophobicity of mixtures, recipes-solutions, research of technological properties of mixtures. Experimentally proved that the brand of concrete is not permeable reached by W12, which can not be obtained by sealing concrete. The results of laboratory tests of concrete with the addition of «Ramsinks-2m» are given. To increase the waterproofing of concrete antiltration barriers, underground structures of buildings and structures, reservoirs, etc. It is proposed to achieve high waterproofing of concrete by adding to its composition of the hydrophobic additive «Ramsinks-2MU».
The use of new hydrophobic materials such as "Ramsinks-2MU" for the manufacture of concrete on the construction of the subway in Kyiv - is an exhaust direction in metrobudination. Reliable waterproofing of outflows and openings can be achieved by applying a water-retailing additive "Ramsinks-2MU" and its modifications. Technological simplificence in the introduction of the latest material is achieved by direct use of hydro-insulating works by introducing it in the appropriate ratio in traditional solutions.
A method for selecting a percentage of a hydrophobic additive with cement for different classes of concrete and for specific mining-geological conditions has been developed. This technique makes it possible for the latest technologies to determine the qualitative characteristics of the hydrophobic additive offered.
The use of this additive in the manufacture of concrete and solutions contributes to an increase in the elasticity of the mixture, prevents the uneven concentration of fillers, as well as prevents mixing of the mixture and increases resistance to aggressive factors. The high waterproofing of products with the additive is achieved with the corresponding concrete composition by fine schedules of hydrophobic particles. By reducing the negative impact of moisture on the design, their durability increases.
Laboratory test tests showed that the introduction of a hydrophobic additive "Ramsinks-2M" significantly affects the strength of the cement stone in the hydrophobic mixtures "Ramsinks-2MU".
The proposed hydrophobic materials have qualitative advantages over other similar materials, as well as cost-beneficial. They can be used when the seams of tunnel processing and stations, as well as waterproofing of monolithic concrete structures in the subway.
Modern gas transmission systems are power facilities based on a main pipeline, which is a continuous pipe, along which devices are placed that provide gas pumping at predetermined parameters. Unlike other linear structures, such as roads, railways, the main pipeline throughout the entire period of operation is in a complex stress state under the influence of the internal pressure of the pumped product and functions as a pressure vessel. The operational reliability, durability and environmental safety of gas transmission systems are ensured by various control devices and pipe fittings.
The article discusses issues related to predicting the operation of pipe fittings during the operation of the gas transmission system, while ensuring the required reliability, durability and environmental safety. An analysis of the phenomena of technical heredity is given, with the help of which it is possible to determine the causes of deviations in the output parameters of pipe fittings in the process of their manufacture or repair. It has been proved that the main feature of technological heredity is the transfer of a certain technological property from the previous technological operation to subsequent ones, characterized by the transfer coefficient of technological heredity. An indispensable condition for the monotonicity of changes in the transmission coefficient of technological heredity in order to ensure the required quality of manufacture or repair of pipe fittings is revealed. The economic principle of predicting the quality of manufacturing or repair of products is proposed for use, a relationship is found between the initial and output technological properties of pipe fittings, a route is chosen to achieve the required quality of its manufacture or repair, including procurement and finishing technological operations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.