УДК 621.785 ДИФФУЗИОННОЕ ТИТАНОАЛЮМОСИЛИЦИРОВАНИЕ СТАЛИ 12Х18Н10Т В ПОРОШКАХ ПРИ ПОНИЖЕННОМ ДАВЛЕНИИХижняк В.Г., д.т.н., профессор кафедры металловедения и термической обработки Аршук М.В., ассистент кафедры металловедения и термической обработки (marina351@rambler.ru ) Дацюк О.Э., аспирант кафедры металловедения и термической обработки Национальный технический университет Украины «Киевский политехнический институт» (03056, Украина, Киев, пр. Победы, 37) Аннотация. Исследованы фазовый и химический составы, структура и микротвердость диффузионных многослойных покрытий, содержащих титан, алюминий и кремний на образцах из стали 12Х18Н10Т. Установлено, что в процессе химико-термической обработки образуются покрытия на основе интерметалидов, карбида и нитрида титана, а также твердый раствор титана, алюминия, кремния никеля, хрома в аустените основы.Ключевые слова: сталь 12Х18Н10Т, титан, алюминий, кремний, диффузионные покрытия.Научный и практический интерес представляет химико-термическая обработка стали 12Х18Н10Т, в результате которой появляется возможность получе-ния нового материала, сочетающего высокие свойства основы и диффузионной зоны.Анализ свойств известных многокомпонентных по-крытий на металлах и сплавах [1, 2] показал целесоо-бразность получения на стали 12Х18Н10Т слоев с уча-стием титана, алюминия, кремния со свойствами, более высокими, чем после однокомпонентного насыщения титаном, алюминием, кремнием. Научно-техническая информация относительно строения и свойств много-компонентных покрытий после совместного насыщения стали 12Х18Н10Т титаном, алюминием, кремнием носит неполный характер [1, 2]. Таким образом, целью настоя-щей работы было получение на стали 12Х18Н10Т мно-гокомпонентных покрытий, исследование их фазового и химического составов, структуры и микротвердости.Покрытия наносили при пониженном давлении в по-рошковой смеси следующего состава: 30 % Ti + 15 % Al + + 15 % Si + 4 % NH 4 Cl + 36 % Al 2 O 3 . Полученные таким образом покрытия были изучены рентгеноструктур-ным, микрорентгеноспектральным, микроструктурным и дюрометрическим методами.Послойным рентгеноструктурным анализом уста-новлено существование в диффузионном слое двух зон: зоны соединений и переходной зоны (см. таб-лицу). В зоне соединений от поверхности к основе Abstract. High content of FeO in primary slag prevents formation of stable skull thereby increasing the thermal load on the fridges and heat losses. Development of indirect reduction reactions that determine the FeO content in primary slag depends on heat transfer conditions. The purpose of this research was to develop methods of modeling of heat transfer in the peripheral zone of blast furnace. The model was developed using the laws of heat transfer and gas dynamics. It allows to estimate the infl uence of ore load, size distribution of iron materials on development of heat transfer processes and recovery work of the gas fl ow in blast furnace. INVESTIGATION OF CONTROL OPPORTUNITIES FOR THERMAL PERFORMANCE OF THE PERIPHERAL ZONE OF BLAST FURNACEKeywords: blast furnace, pe...
Захисні титаноалітовані покриття на сталі 40Х13Національний технічний університет України «Київський політехнічний інститут», 03056, Україна, Київ, вул. Політехнічна, 35, корп. № 9, marina351@rambler.ru Проведені дослідження щодо нанесення на поверхню сталі 40Х13 багатокомпонентних титаноалітованих покриттів в контейнерах з плавким затвором з використанням суміші порошків титану, алюмінію; гідриду титану; титаноалітування сталі 40Х13 з попередньо нанесеним шаром ТіN; титаноалітування попередньо азотованої сталі в середовищі аміаку. Показана можливість формування на сталі 40Х13 покриттів за участю сполук Ti 4 Fe 2 O, FeTiAl, TiN, TiC та перехідної зони. Встановлено розподіл хімічних елементів та мікротвердості за товщиною дифузійних покриттів. Максимальна мікротвердість виявлена для шарів ТіС -31,0-34,0 ГПа; для шарів ТіN -19,5-22,5 ГПа; для зони Ti 4 Fe 2 O, FeTiAl -5,0-7,0 ГПа.Ключові слова: дифузійні покриття, титаноалітування, азотування, сталь 40Х13, карбід титану, нітрид титану, нітрид хрому, карбонітрид, мікротвердість. 27.12.2014; прийнята до друку 15.06.2015. Стаття поступила до редакції
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.