В статье авторы рассматривают физико-химические свойства нанозолота, содержащегося в рудах и минералах. Ими описаны наиболее важные физико-химические свойства нанозолота. Показаны различные формы существования наноча- стиц золота. У наночастицы размером 2 нм около 60% всех атомов составляют поверхностные атомы золота с неском- пенсированной валентностью. Более мелкие наночастицы золота имеют электронное окружение и способны активно осуществлять каталитические реакции. Обсуждены и показаны коллоиды, золи и мицеллы золота. Охарактеризованы химические катализаторы, сформированные на основе наночастиц золота.
Поверхность образцов циркониевого сплава Zr-1%Nb обрабатывалась титаном методом плазменно-иммерсионной ионной имплантации. Затем на имплантированные и исходные образцы наносились покрытия TiN вакуумно-дуговым осаждением. До и после каждой из указанных обработок исследовались изменения скорости сорбции водорода, распределения элементов по глубине, топографии поверхности. Получено, что отдельно вакуумно-дуговое осаждение или плазменно-иммерсионная ионная имплантация приводят к уменьшению скорости сорбции водорода (в 2-15 раз). В тоже же время, совмещение операций в порядке: плазменно-иммерсионная ионная имплантация, затем вакуумно-дуговое осаждение, уменьшает скорость сорбции на 1-2 порядка. Определено, что ключевым параметром указанных методов, влияющим на водородопроницаемость, распределение элементов по глубине и топографию поверхности является величина смещения на образце (подложке). Для нашей установки оптимальная величина этого смещения составила -1500 В при плазменно-иммерсионной ионной имплантации и -150 В при вакуумно-дуговом осаждении.