There is presented a review of scientific literature characterizing the main directions of modern research of the process of grinding of fibrous semi-finished products of high consistence. Theoretical approaches are described in the study of qualitative parameters of pulp during its processing in knife grinding machines. Researchers note an increase in the paper-forming properties of the pulp and the physical and mechanical characteristics of the finished product. This paper provides an overview of experimental studies of the high consistence pulp milling process. The effect of high consistence mass grinding intensity on the quality of the finished product is considered, the nature of fiber development when grinding high and low consistence mass is compared. Experimental studies show that an increase in the intensity of exposure when grinding a high consistence mass leads to a decrease in the tensile energy absorption index, and a decrease in the deformation of the paper sheet is also observed with an increase in the grinding intensity. With an increase in the pulp c consistence, a change in the degree of delamination, internal and external fibrillation of the fiber wall is observed. The high-consistence pulp milling process is accompanied by higher specific energy consumption compared to low- consistence pulp milling, but observations at the fiber wall level show a more developed external specific surface area. This review of the scientific literature will serve as a basis for further research on the grinding of high consistence fibrous materials.
Influence of the thermochemical processing (the cook) conditions and of the milling on characteristic of the waste paper with polyurethan and polyaziridin was studied. The waste paper was reduced to the degree size of the particles 5...8 mm in mill of the dry grind and chemical processing under higher temperature (to 70 °C) by solution, contain sodium persulfate and hydroxide; duty of water 6. Duration of cook varied from 1 to 5 hours, expense of persulfate sodium varied from 2 to 12%, hydroxide sodium – from 0.5 to 3% from mass of the waste-papers. The secondary fiber was obtaining by breaking-up of the pulp in the hydropulper. The dependency of the length and factor of the form of the secondary fiber from conditions cook was absent. The slight width increasing of the fibers with the higher pH of cooking liquor was determined: from 26.5 мкм under pH 3–4 to 29 мкм under pH 8–9. The conjectural reason is swelling of the cell wall. The waste paper milling was executed in the «stream-barrier» machine. The strength properties of the paper correspond with the feature, inherent of the secondary pulp.
This article presents an example of the profile view of a knife grinding set with a spatial arrangement of knives.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.