No abstract

No abstract

Two regimes of oxidation by water are revealed for nanocrystalline aluminum prepared by the mechanical activation of its mixture with graphite and distributed in the matrix of amorphous carbon. At the temperatures 50 ° C < T < 90 ° C, nanosized aluminum particles interact with water under quasi-isothermal conditions. The main products are hydrogen and pseudoboehmite AlOOH; a low content of bayerite Al(OH) 3 is also formed. After the induction period, the kinetics of interaction can be satisfactorily described by the law of a diminishing sphere. The effective activation energy of the reaction is equal to 61 ± 10 kJ/mol and is identical for the samples of submicron aluminum prepared by different procedures. At temperatures above 90-95 ° C, the oxidation of mechanically activated aluminum by water is transformed into a thermally self-accelerated explosion process. Under these conditions, the oxidation of aluminum to α -Al 2 O 3 is accompanied by an exothermal reaction between the metal and the carbon matrix during which aluminum carbide Al 4 C 3 is formed.

No abstract

Sm2−xCaxZr2O7−x/2 (x = 0, 0.05, 0.1) and Gd2−xCaxZr2O7−x/2 (x = 0.05, 0.1) mixed oxides in a pyrochlore–fluorite morphotropic phase region were prepared via the mechanical activation of oxide mixtures, followed by annealing at 1600 °C. The structure of the solid solutions was studied by X-ray diffraction and refined by the Rietveld method, water content was determined by thermogravimetry (TG), their bulk and grain-boundary conductivity was determined by impedance spectroscopy in dry and wet air (100–900 °C), and their total conductivity was measured as a function of oxygen partial pressure in the temperature range: 700–950 °C. The Sm2−xCaxZr2O7−x/2 (x = 0.05, 0.1) pyrochlore solid solutions, lying near the morphotropic phase boundary, have proton conductivity contribution both in the grain bulk and on grain boundaries below 600 °C, and pure oxygen–ion conductivity above 700 °C. The 500 °C proton conductivity contribution of Sm2−xCaxZr2O7−x/2 (x = 0.05, 0.1) is ~ 1 × 10−4 S/cm. The fluorite-like Gd2−xCaxZr2O7−x/2 (x = 0.1) solid solution has oxygen-ion bulk conductivity in entire temperature range studied, whereas proton transport contributes to its grain-boundary conductivity below 700 °C. As a result, of the morphotropic phase transition from pyrochlore Sm2−xCaxZr2O7−x/2 (x = 0.05, 0.1) to fluorite-like Gd2−xCaxZr2O7−x/2 (x = 0.05, 0.1), the bulk proton conductivity disappears and oxygen-ion conductivity decreases. The loss of bulk proton conductivity of Gd2−xCaxZr2O7−x/2 (x = 0.05, 0.1) can be associated with the fluorite structure formation. It is important to note that the degree of Ca substitution in such solid solutions (Ln2−xCax)Zr2O7−δ (Ln = Sm, Gd) is low, x < 0.1. In both series, grain-boundary conductivity usually exceeds bulk conductivity. The high grain-boundary proton conductivity of Ln2−xCaxZr2O7−x/2 (Ln = Sm, Gd; x = 0.1) is attributable to the formation of an intergranular CaZrO3-based cubic perovskite phase doped with Sm or Gd in Zr sublattice.