Уральский Федеральный Университет2 ООО «НПК «УралТермоКомплекс» ТЕХНИЧЕСКОЕ ПЕРЕВООРУЖЕНИЕ ВЕРТИКАЛЬНОЙ КАМЕРНОЙ ПЕЧИ ДЛЯ ТЕРМИЧЕСКОЙ ОБРАБОТКИ КРУПНЫХ ПОКОВОКАннотация. На примере Уралмашзавода рассмотрено техническое перевооружение камерной вертикальной печи с применением современных технологий печестроения и материалов, произведен расчет тепловых балансов и основных показателей работы печи до и после техниче-ского перевооружения. Подтверждено значительное улучшение показателей работы печи после технического перевооружения.Ключевые слова: термообработка, вертикальная термическая печь, тепловой баланс, волокнистые огнеупоры, рекуперативная горелка. TECHNICAL RE-VERTICAL CHAMBER FURNACES FOR HEAT TREATMENT OF LARGE FORGINGSAbstract. Uralmashzavod is used as basis to assess technical re-equipment of chamber vertical heat-treatment furnace with applying modern technologies of furnace-building and modern materials. The calculation of thermal balances and furnace primary performance characteristics was made before and after re-equipment. Signifi cant improvement of furnace performance characteristics after technical re-equipment was confi rmed.Keywords: heat-treatment, vertical heat-treatment furnace, thermal balance, fi brous refractory material, recuperative burner.На заводах тяжелого машиностроения эксплуати-руют вертикальные печи для термической обработки крупных длинномерных поковок.На ОАО «Уралмашзавод» подобные печи применя-ют для нагрева роторов турбин и прокатных валков с целью их термической обработки. Построенные в на-чале прошлого века, эти печи к настоящему моменту морально и физически устарели. Повышенные требо-вания к качеству термической обработки заставляют за-ниматься модернизацией этих тепловых агрегатов.В данной статье изложены методы и оборудование, использованные при техническом перевооружении од-ной из вертикальных печей кузнечно-прессового цеха Уралмашзавода. Конструкция и тепловая работа печи до технического перевооруженияКамерная вертикальная печь № 22 была построена по кирпичной технологии, с двухслойной футеровкой. Огнеупорный слой был выполнен из шамота класса А, теплоизоляционный слой -из шамота легковеса. Толщи-на футеровки составляла 460 мм, что при работе печи в периодическом режиме приводит к значительной акку-муляции тепла кладкой. Свод печи был выполнен в виде двух раздвижных полукрышек. Загрузка печи осуществ-лялась сверху. Высота рабочего пространства печи 12 м, внутренний диаметр 3 м. Изделия в печи подвешивают на специальной траверсе, опирающейся на балки. Уста-ревшая конструкция механизмов перемещения крышки приводила к неплотностям и, как следст вие, к большим теплопотерям, что негативно сказывалось на расхо-де топлива. Дымоотведение из рабочего пространства осуществлялось через дымоотводящий канал, располо-женный в поду печи, дымовой боров и дымовую трубу, общую для нескольких печей. Печь была оснащена 13 горелками конструкции Уральс кого завода тяжелого машиностроения. Подогрев воздуха, подающегося на горение, отсутствовал. Ведение теплового режима печи осуществлялось вруч...
Increasing performance of steelmaking units is possible with changing methods of steel production. Such variances entail serio us changes in the subsequent redistributions: in metals processing by pressure and in thermal treatment of finished metal products. It is known that these two metallurgical processes are equipped with a large number of heating and thermal furnaces, and their thermal work does not always meet increased requirements for products quali ty. Issues of improving thermal performance of furnaces are also relevant in mechanical engineering. High technological requirements are associa ted with very strict environmental ones. Therefore, a new concept is needed for the design and construction of modern highly automated industrial heating furnaces. In order to improve the design and technical and economic indicators, technical obsolescence and the construction of new industrial furnaces are carried out. In design and construction of furnaces, fuel-burning devices of new designs and modern materials are used. In turn, this necessitates the use of new approaches to working space and heating system design of the furnace, taking into account arrangement of heated products charge. Such events are carried out, as a rule, in operating workshops, that causes certain difficulties due to limited space provided for placement of new furnaces and equipment for their operation and maintenance. A complex study was made of the design and thermal performance of a block of three chamber thermal furnaces. They were built in a limited space of the workshop with specific loading and delivery of heated thin sheet.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.