Nanostructured doped ceria is a prospective material for catalytic applications such as the construction of membranes with mixed electronic and ionic conductivity for effective syngas production. In this article, the surface properties of nanostructured ceria doped with praseodymium have been studied by X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and Fourier transform infrared spectroscopy of adsorbed carbon monoxide. The effects of supporting 1.4 wt % Pt as well as structural changes upon the reduction of the samples with methane have been investigated. While in samples without supported platinum, mainly praseodymium cations are reduced in a methane atmosphere; stronger reduction of cerium cations was found in the case of surface modification with Pt. The structural differences correlate with results from temperature-programmed reaction experiments with methane. Explanations are discussed in terms of different reaction mechanisms.

No abstract

Abstract. Goethite, hematite and intermediate products of goetite thermal decomposition were studied by IR and Raman spectroscopy to identify these products used as catalysts of some chemical reactions. The presence of a small number of OH-groups in the products of the decomposition up to 900-1000 ~ C was supposed to hinder the formation of perfect hematite structure. The hypothesis concerning C6v space group of protohematite indistinguishable from D36a space group of hematite by X-Ray diffraction was suggested. This hypothesis explains both the additional lines in IR and Raman spectra compared to hematite spectra and the same position of peaks in X-Ray diffraction picture.

The kinetics of 18O/16O isotopic exchange over CeO2-ZrO2-La2O3 and Pt/CeO2-ZrO2 catalysts have been investigated under the conditions of dynamic adsorption-desorption equilibrium at atmospheric pressure and a temperature range of 650-850 degrees C. The rates of oxygen adsorption-desorption on Pt sites, support surface, oxygen transfer (spillover) from Pt to the support as well as the amount of oxygen accumulated in the oxide bulk, and oxygen diffusion coefficient were estimated. The nanocrystalline structure of lanthana-doped ceria-zirconia prepared via the Pechini route with a developed network of domain boundaries and specific defects guarantees a high oxygen mobility in the oxide bulk (D = (1.5 / 2.0).10-18 m2 s-1 at 650 degrees C) and allows accumulation of over-stoichiometric/excess oxygen. For Pt/CeO2-ZrO2, oxygen transfer from Pt to support (characteristic time < 10-2 s) was shown to be responsible for the fast exchange between the gas-phase oxygen and oxygen adsorbed on the mixed oxide surface. The rate of direct exchange between the gas phase and surface oxygen is increased as well due to the increased concentration (up to 2 monolayers) of surface/near subsurface oxygen species accumulated on the oxygen vacancies (originated from the incorporation of highly dispersed Pt atoms). The characteristic time of diffusion of the oxygen localized in the subsurface layers is about 1 s. The overall quantity of over-stoichiometric oxygen and/or hydroxyl groups accumulated in the bulk can reach the equivalent of 10 monolayers, and characteristic time of oxygen diffusion within the bulk is about 20 s. All these kinetic data are required for the further step of modeling partial oxidation of hydrocarbons under steady- and unsteady-state conditions.

No abstract

For samples of the Ce 1-x Gd x O 2-y system prepared by the Pechini route and promoted with Pt, the mobility and reactivity of lattice oxygen were found to correlate with the density of surface and bulk anion vacancies.

No abstract

Nanostructured ceria doped with other rare earth elements is a good oxygen ion conductor, which gives rise to various catalytic applications such as the construction of membranes for syngas production by partial oxidation of methane. This article focuses on the Gd-doped cerium dioxides, which can be modified with Pt or Pd to enhance the reactivity of the lattice oxygen in interaction with methane. The aim of the work is the elucidation of correlations between the structural, electronic, and chemical properties of these nanomaterials. Detailed studies were performed for a series of samples with and without surface modification by noble metals using a complex combination of physicochemical methods: XRD, TEM, CH(4) TPR, XPS, SIMS, and FTIR spectroscopy of adsorbed CO. XPS and TPR data revealed that surface modification with noble metals enhances the reducibility of the doped ceria support, where the effect is more pronounced for Pd than for Pt. The formation of highly cationic Pd species due to strong metal support interactions provides a possible explanation for this behavior. Furthermore, the results obtained in the present work for the Gd-doped ceria system are compared to those obtained previously for the Pr-doped ceria system.