Дослiджувалася проблема iнiцiювання детонацiї в пульсуючих детонацiйних двигунах. Напрямком вирiшення даної проблеми обрано застосування детонацiйних труб з багатоосередковим запалюванням. Як джерела запалювання використанi два iскрових розряди, якi запалювалися синхронно. Iскровi розряди запалювалися на вiдстанi, за якої забезпечувалась iнтенсивна газодинамiчна взаємодiя мiж розрядами. Взаємодiя полягала в зiткненнi ударних хвиль, що генеруються iскровими розрядами. В результатi, в областi мiж iскровими промiжками забезпечувалося зростання температури газу за рахунок зiткнення ударних хвиль, що зустрiчно рухаються. Дослiдження впливу двоiскрового запалювання на час i довжину дiлянки переходу горiння в детонацiю в детонацiйнiй трубi проведено шляхом порiвняння параметрiв переходу в випадках одноiскрового i двоiскрового запалювання за iнших рiвнозначних умов дослiджень. Дослiдження проводилися на детонацiйної трубi довжиною 2,3 м i внутрiшнiм дiаметром 22 мм. Свiчки запалювання розташовувалися в торцевiй частинi труби. Використовувалася стехiометрична сумiш пропану з киснем, що на 50 % розбавлена азотом за початковим тиску в сумiшi, що дорiвнює 50 кПа. Для реєстрацiї часу розповсюдження фронту реакцiї i вимiрювання швидкостi процесу труба оснащувалася 22-ма iонiзацiйними датчиками. Вiдстань мiж джерелами запалювання дорiвнювало 6 мм. Довжина розрядного промiжку в кожному джерелi запалювання становила 2,5 мм. Джерела запалювання у виглядi свiчок запалювання пiдключалися до високовольтних блокiв iз повною енергiєю розряду 3,3 Дж.За результатами дослiджень виявлено скорочення вiдстанi переходу горiння в детонацiю в 1.6...2 рази i часу переходу з 3,9 мс до 1,2 мс в разi переходу вiд одноiскрового до двоiскрового запалювання. Отриманi результати можуть бути використанi пiд час проектування систем запалювання в пульсуючих детонацiйних двигунахКлючовi слова: детонацiйна труба, багатоосередкове запалювання, перехiд горiння в детонацiю, iскрове запалювання UDC 536.46+533.9
Об’єктом дослідження є процес оцінювання стану сталевих конструкцій будівель при розвитку пожежі. Обґрунтовано та проаналізовано використання стандартних кривих по-жеж, як ISO 834, ASTM E119, що визначають температурну залежність у часі. На підставі цього запропоновано розрахунковий метод з визначення швидкості зміни температури для захищених та незахищених сталевих конструкцій з використанням кривих пожеж. Для захи-сту сталевих конструкцій від високої температури використовувалися такі вогнезахисні за-соби, як теплоізоляційні плити, гіпсокартоні листи та цементно-піщана штукатурка з відпо-відними тактико-технічними характеристиками. За отриманими результатами дослідження встановлено, що найбільш ефективним вогнезахисним засобом для сталевих конструкцій є теплоізоляційні плити, а найменш ефективним цементно-піщана штукатурка. Це визначено за рахунок різниці температури, так відповідно до ISO 834 для теплоізоляційної плити на 5 годині впливу, температура становить 896,2 ºС, а для гіпсокартону – 474,8 ºС, цементно-піщаної штукатурки – 316,25 ºС. Так відповідно до ASTM E119 для теплоізоляційної плити на 5 годину впливу, температура становить 869,85 ºС, а для гіпсокартону – 463,34 ºС, це-ментно-піщаної штукатурки – 310,70 ºС. З проведених результатів дослідження можна за-значити, що стандартні криві пожежі ISO 834 та ASTM E119 дають змогу проводити дослі-дження та визначати швидкість зміни температури при цьому слід зазначити що суттєво вони не відрізняються між собою. Також отримані графічні залежності, для сталевих конс-трукцій з урахуванням засобів вогнезахисту та стандартних кривих пожеж ISO 834 та ASTM E119. Отримані результати дослідження дають змогу підвищити рівень пожежної безпеки будівель та споруд на стадіях проектування та експлуатації, а також вчасно визна-чати граничний (критичний) стан сталевих конструкцій під час проведення оперативних дій з гасіння пожеж.
The aim of the work is to study the influence of the length of the spark gap on energy input into the discharge channel during its gas-dynamic expansion. Methodology. The research is carried out by numerical modeling of the process of spark discharge development at variable values of the discharge gap length and at invariable other discharge conditions. The length of the gap was set in the range from 1 mm to 20 mm. The study was conducted using a numerical model of spark development, which takes into account the processes of nonstationary gas-dynamic expansion of the spark channel, the transient process in the electric circuit, nonequilibrium chemical processes, gas ionization, heat transfer and electrons thermal conductivity. The simulation was performed in atmospheric pressure nitrogen. The calculation was performed for various parameters of the RLC circuit, such as capacitance, inductance, resistance and voltage across the capacitor. Results. The study evaluates the influence of the spark length on the discharge current, the resistance of the spark channel, the energy deposited in the spark channel, and the distribution of thermodynamic parameters of the gas during the development of the spark discharge. It is confirmed that increasing the length of the gap increases the resistance of the spark. The deviation from the linear relationship between the deposited energy or the radiated energy and the length of the spark gap is estimated. Scientific novelty. A linear relationship between the gap length and the deposited energy is revealed when the total energy is above tens of Joules. Deviations from the linear dependence were detected in the discharge circuit when the total energy is below one of Joules. Practical value. The research results allow predicting the effect of the spark gap length on the energy input into the discharge channel under conditions of a slight change in the discharge current. In the conditions of essential change of amplitude of discharge current it is expedient to apply numerical researches for specification of changes in the energy deposited into a spark discharge.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.