Актуальность. Перспективным направлением разработки нефтяных месторождений является применение нетрадиционных способов добычи трудноизвлекаемых запасов. Особый интерес уделяется технологиям использования углекислого газа в условиях политики снижения углеродного следа в мировом энергобалансе. Диоксид углерода является одним из наиболее эффективных вытесняющих агентов для повышения нефтеотдачи пластов, который может растворяться в легкой и средней фракции нефти, способствуя ее набуханию, уменьшая вязкость и увеличивая подвижность. В связи с этим актуальной задачей является поиск и практическое применение эффективных решений. Одной из таких технологий использования углекислого газа является Huff-n-Puff. Цель: провести оценку мирового опыта применения технологии СО2 Huff-n-Puff; проанализировать факторы, влияющие на эффективность метода; установить взаимосвязь технологических факторов при использовании СО2 Huff-n-Puff. Объект: технология СО2 Huff-n-Puff. Методы: литературный обзор; анализ параметров технологии. Результаты. Технология СО2 Huff-n-Puff отличается эффективностью в широком спектре свойств пласта и нефти. В ходе исследований выявлены основные критерии эффективности технологии Huff-n-Puff, наиболее важным из которых является достижение полной растворимости углекислого газа в нефти. Основными факторами, влияющими на эффективность данного процесса, являются режимные технологические параметры, естественная и искусственная трещиноватость, молекулярная диффузия. Оценен эффект прироста нефтеотдачи от влияния геометрии и длины трещин. Авторами статьи для анализа параметров технологии и выявления статистических зависимостей использована тепловая карта и характеристики распределения. Также применен градиентный бустинг (метод машинного обучения) с использованием библиотеки SHAP для определения влияния технологических параметров на эффективность СО2 Huff-n-Puff. Установлен прирост нефтеотдачи от применения рассматриваемой технологии до 5,4%.
Актуальность. Одной из основных проблем нефтедобывающей промышленности в сфере добычи нефти и газа является добыча больших объемов балластной воды. Средняя кратность перекачиваемой воды к нефти может составлять 4:1 и более. На территории Пермского края данная проблема является особенно актуальной, так как многие месторождения находятся на 3 и 4 стадиях разработки и требуют внедрения новых технологий для более рентабельной добычи нефти. В связи с перекачкой больших объемов жидкости происходит более быстрый процесс износа оборудования и появляются дополнительные затраты электроэнергии для его использования. В связи с этим внедрение технологии скважинной и кустовой сепарации водонефтяной эмульсии является одним из наиболее эффективных способов решения производственной задачи путем децентрализации системы сбора и подготовки скважинной продукции. Цель:уменьшение затрат на сбор и подготовку скважинной продукции путем применения технологии кустовой сепарации водонефтяной эмульсии при децентрализованной системе подготовки. Объект: кусты скважин со средней обводненностью65–70% и более. Методы:обзор научной литературы, моделирование процесса кустовой сепарации в Aspen HYSYS; лабораторные исследования на созданном макете, имитирующем скважину. Результаты.Представлена технология кустового разделения продукции скважин на нефть и воду с дальнейшимиспользованием попутнодобываемой воды в системе поддержания пластового давления. Представлена принципиальная технологическая схема установки. Проведены лабораторные испытания, выявлены оптимальные параметры её работы.Приведена технико-экономическое оценка реализации технологии и обоснованные технические решения.
Актуальность. Подготовка продукции добывающих скважин до требований 1 группы качества товарной нефти в Пермском крае с каждым годом становится все более актуальным вопросом. Большинство эксплуатационных объектов находятся на завершающих стадиях разработки и характеризуются высокой обводненностью скважинной продукции, что в дальнейшем при сборе и промысловой подготовке приводит к образованию водонефтяных эмульсий. Стойкие водонефтяные эмульсии плохо подвергаются разрушению при подготовке их традиционными методами, такими как термическое и термохимическое гравитационное отстаивание. Данные методы подготовки просты в практическом применении, но не всегда обеспечивают требуемый результат. В связи с этим актуальной задачей является поиск и практическое применение новых технологий подготовки углеводородного сырья, которые могут применяться как отдельно от традиционных методов, так и в совокупности с ними. Таким методом является ультразвуковое воздействие. Цель: провести оценку эффективности ультразвукового воздействия при разрушении стойких водонефтяных эмульсий, подобрать оптимальные параметры ультразвукового воздействия. Объект: водонефтяная эмульсия с резервуара водоподготовки на установке промысловой подготовки нефти, которая расположена на территории Пермского края (Россия). Методы: определение основных технологических показателей эффективности ультразвукового воздействия, проведение опытно-промышленных испытаний, построение ключевых графиков и зависимостей. Результаты. Показан опыт применения ультразвукового воздействия, отмечена высокая эффективность разрушения стойких водонефтяных эмульсий по сравнению с традиционными методами. Авторами работы проведены опытно-промышленные испытания на мобильной установке подготовки скважинной продукции с применением ультразвукового воздействия на стойкие водонефтяные эмульсии, произведена оценка технологического эффекта и разработаны рекомендации по практическому применению предложенного комплексного метода. Научная новизна работы заключается в определении параметров эффективного процесса разрушения конкретного типа стойких водонефтяных эмульсий при совмещении термохимического и импульсного ультразвукового воздействия в докавитационном режиме. Установлена возможность снижения дозировки реагента-деэмульгатора в комбинации с ультразвуковым воздействием до 50 г/т. Показано снижение эффективности разрушения стойких водонефтяных эмульсий при комплексном воздействии на эмульсию низкой (менее 4 %) обводненности. Показано, что работа импульсной ультразвуковой системы на режиме работа–пауза 95/5 является оптимальной.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.