The problem of reinforcing the mirror surfaces of space-based astronomical optics and their protection against external factors is discussed. To solve this problem, the possibility of the deposition of diamond-like coatings onto them is considered. Using mirrors with Al and Cu coatings as an example, it has been experimentally demonstrated that the pulsed laser deposition of a carbon layer with a thickness of 30 nm onto them leads to an increase in the surface hardness by 25 and 100%, respectively. It has been established that the reinforcing coating has no effect on the shape deviations of mirrors and decrease their surface roughness. In this case, the reflection factor appreciably decreases in the visible region (400–780 nm), whereas its decrease in the infrared region (above 780 nm) is no more than 5%.
Представлен пример вычисления аберрационных изображений, возникающих в оптических системах (ОС), содержащих акустооптические (АО) дифракционные элементы. Метод расчета основан на интеграции аналитических алгоритмов расчета таких элементов в программное обеспечение для автоматизированного расчета классических ОС. Этот подход может быть использован для расчета ОС, содержащих АО-элементы различной конфигурации, и оптимизации существующих приборов на их основе. DOI: 10.21883/PJTF.2017.04.44300.16388
В настоящее время визуально-измерительный контроль (ВИК) является обязательной процедурой при производстве, сборке и испы-таниях двигателей, трубопроводов, баллонов и многих других про-мышленных изделий. Основными целями ВИК являются оценка со-стояния поверхности, выявление, классификация и оценка размеров имеющихся дефектов: забоин, коррозии, отложений и др. При кон-троле состояния труднодоступных внутренних полостей неразборных или не подлежащих разборке объектов основными инструментами ВИК являются технические видеоэндоскопы [1]. Данные приборы, которые пришли на смену широко используемым ранее жестким лин-зовым и гибким оптоволоконным эндоскопам [2], позволяют не толь-ко визуализировать, но также регистрировать и обрабатывать изоб-ражение исследуемого объекта.Особым классом задач, решаемых при видеоэндоскопических ис-следованиях, является снятие трехмерных геометрических парамет-ров (расстояний, площадей и пр.) выявляемых дефектов. К настоя-щему времени разработано несколько методов подобных измерений, аппаратно и программно реализованных в некоторых современных видеоэндоскопах: стереоскопический, теневой [3,4], многоточечный [5] и фазовый [6]. Основу всех этих методов составляет триангуляци-онный принцип измерения трехмерных координат точки [7].Наибольшее распространение в видеоэндоскопии получил сте-реоскопический метод измерений, заключающийся в регистрации
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.