The new phases BaLa0.9M0.1InO3.95 (M = Ca2+, Sr2+, Ba2+) with a Ruddlesden-Popper structure were obtained. It was established that all investigated samples were capable for the water uptake from the gas phase. The ability of water incorporation was due to not only by the presence of oxygen vacancies, but also due to the presence of La-O blocks in the structure. The degree of hydration of the samples was much higher than the concentration of oxygen vacancies and the composition of the samples appear to be BaLaInO3.42(OH)1.16, BaLa0.9Ca0.1InO3.25(OH)1.4, BaLa0.9Sr0.1InO3.03(OH)1.84, BaLa0.9Ba0.1InO2.9(OH)2.1. The degree of hydration increased with an increase in the size of the dopant, i.e., with an increase in the size of the salt blocks. It was proven that doping led to the increase in the oxygen ionic conductivity. The conductivities for doped samples BaLa0.9M0.1InO3.95 were higher than for undoped composition BaLaInO4 at ~1.5 order of magnitude. The increase in the conductivity was mainly attributed to the increase of the carrier concentration as a result of the formation of oxygen vacancies during doping. The proton conductivities of doped samples increased in the order Ca2+–Sr2+–Ba2+ due to an increase in the concentration of protons. It was established that all doped samples demonstrated the dominant proton transport below 450 °C.

No abstract

No abstract

In this work, the effect of acceptor of La3+‐sublattice and donor of In3+‐sublattice doping on the local structure of proton conductor BaLaInO4 with block‐layered Ruddlesden–Popper structure was investigated. It was showed that both types of doping led to appearance of new kinds of the defects (oxygen vacancy and oxygen interstitial) and to the decrease in the tilting angles of [InO6] octahedra due to the expansion of unit cell in the ab direction. The formation of a less distorted structure provided facilitated oxygen‐ionic and protonic transport and increased ionic conductivity.

No abstract