ВведениеРазвитие базисных отраслей промышленности, определяющих технический прогресс, в основном зависит от создания новых конструкционных мате- МИСиС (119049, г. Москва, В-49, Ленинский пр-т, 4 (141070, Московская обл., г. Королев, ул. Пионерская, 4). E-mail: info@compozit-mv.ru. С использованием методов оптической и электронной микроскопии, рентгеноструктурного и рентгеноспектрального анализов, лазерной дифракции исследовано влияние параметров механического активирования (МА) на структуру и фазовый состав реакционных смесей Ni-Al, а также образующихся из них при последующем самораспространяющемся высокотемпературном синтезе (СВС) продуктов. Определены оптимальные режимы МА реакционных смесей и условия синтеза пористых спеков. Выбраны специальные функциональные добавки нанопорошков Al 2 O 3 , BN и WC , которые уве-личивают пористость спеков и облегчают последующее измельчение, и определено их количество. Выявлено, что наибо-лее эффективно способствуют разрушению частиц NiAl добавки нитрида бора и карбида вольфрама. Получены субмик-ронные порошки с наноблочной структурой на основе NiAl.Ключевые слова: механическое активирование (МА), самораспространяющийся высокотемпературный синтез (СВС), ин-терметаллиды, субмикронный порошок, функциональные добавки.The influence of parameters of mechanical activation (MA) on the structure and phase composition of the Ni-Al reaction mixtures as well as the products that are formed from them during the subsequent self-propagating high-temperature synthesis (SHS) is investigated using optical and electron microscopy, X-ray structural analysis, electron probe microanalysis, and laser diffraction. Optimal MA modes of reaction mixtures and optimal synthesis conditions of porous cakes are determined. Special functional additives of Al 2 O 3 , BN, and WC powders, which increase the cake porosity and facilitate the subsequent grinding, are selected; and their amount is determined. It is revealed that boron nitride and tungsten carbide additives most efficiently promote the destruction of NiAl particles. Submicron powders with the NiAl-based nanoblock structure are prepared.