The integration of polymer materials with self-healing features into advanced lithium batteries is a promising and attractive approach to mitigate degradation and, thus, improve the performance and reliability of batteries. Polymeric materials with an ability to autonomously repair themselves after damage may compensate for the mechanical rupture of an electrolyte, prevent the cracking and pulverization of electrodes or stabilize a solid electrolyte interface (SEI), thus prolonging the cycling lifetime of a battery while simultaneously tackling financial and safety issues. This paper comprehensively reviews various categories of self-healing polymer materials for application as electrolytes and adaptive coatings for electrodes in lithium-ion (LIBs) and lithium metal batteries (LMBs). We discuss the opportunities and current challenges in the development of self-healable polymeric materials for lithium batteries in terms of their synthesis, characterization and underlying self-healing mechanism, as well as performance, validation and optimization.

We here demonstrate the preparation of composite polymer electrolytes (CPEs) for Li-ion batteries, applicable for 3D printing process via fused deposition modeling. The prepared composites consist of modified poly(ethylene glycol) (PEG), lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) and SiO2-based nanofillers. PEG was successfully end group modified yielding telechelic PEG containing either ureidopyrimidone (UPy) or barbiturate moieties, capable to form supramolecular networks via hydrogen bonds, thus introducing self-healing to the electrolyte system. Silica nanoparticles (NPs) were used as a filler for further adjustment of mechanical properties of the electrolyte to enable 3D-printability. The surface functionalization of the NPs with either ionic liquid (IL) or hydrophobic alkyl chains is expected to lead to an improved dispersion of the NPs within the polymer matrix. Composites with different content of NPs (5%, 10%, 15%) and LiTFSI salt (EO/Li+ = 5, 10, 20) were analyzed via rheology for a better understanding of 3D printability, and via Broadband Dielectric Spectroscopy (BDS) for checking their ionic conductivity. The composite electrolyte PEG 1500 UPy2/LiTFSI (EO:Li 5:1) mixed with 15% NP-IL was successfully 3D printed, revealing its suitability for application as printable composite electrolytes.

Vitrimers have been widely employed in self-healing, recyclable, and shape-shifting materials. However, the application of catalyst-free vitrimers to create self-healable and mechanically robust gel polymer electrolytes (GPEs) remains a challenge, often limiting the potential of vitrimer-based materials. Herein, we utilized a catalyst-free dynamic covalent bond (silyl ether) as a linkage to prepare self-healable and mechanically robust GPEs, which are fully reprocessable. By incorporating polymeric ionic liquids into the dynamically cross-linked networks, both ion conductivity and mechanical properties can be flexibly tuned. The dynamic property of the network was demonstrated through frequency sweep rheology, which revealed a rubbery-like behavior at high frequencies and a liquidlike behavior at low frequencies. This dynamic feature enables self-healing and allows for reprocessing via embedding of such dynamic covalent networks into the GPEs. The GPEs containing 80 wt % of a bis(trifluoro­methansulfonamide) lithium/ionic liquid (LiTFSI/IL) mixture exhibited good ion conductivites of 0.13 mS/cm at 20 °C and 1.88 mS/cm at 80 °C. Furthermore, the elastic modulus of the GPEs could reach a value of 0.24 MPa and was able to persist through electrode-volume expansions during charging/discharging.The tunable dynamic properties, coupled with high ion conductivity and a high modulus, indicate promising applications for this type of dynamic bond in sustainable solid electrolytes.

Vitrimeric PILs: conductive, reprocessable, self-healable, 3D-printable material as promising electrolyte for Li-ion batteries.