Kinetics of the oxidation of tryptophan (Trp) and kynurenine (Kyn), precursors of nitrogenous disinfection byproducts (N-DBP), by ferrate(VI) (Fe(VI)O4(2-), Fe(VI)) were investigated over the acidic to basic pH range. The second-order rate constants decreased with increase in pH, which could be described by the speciation of Fe(VI) and Trp (or Kyn). The trend of pH dependence of rates for Trp (i.e., aromatic α-amino acid) differs from that for glycine (i.e., aliphatic α-amino acid). A nonlinear relationship between transformation of Trp and the added amount of Fe(VI) was found. This suggests that the formed intermediate oxidized products (OPs), identified by LC-PDA and LC-MS techniques, could possibly compete with Trp to react with Fe(VI). N-Formylkynurenine (NFK) at pH 7.0 and 4-hydroxyquinoline (4-OH Q) and kynurenic acid (Kyn-A) at pH 9.0 were the major OPs. Tryptophan radical formation during the reaction was confirmed by the rapid-freeze quench EPR experiments. The oxygen atom transfer from Fe(VI) to NFK was demonstrated by reacting Fe(18)O4(2-) ion with Trp. A proposed mechanism explains the identified OPs at both neutral and alkaline pH. Kinetics and OPs by Fe(VI) were compared with other oxidants (chlorine, ClO2(•), O3, and (•)OH).

This review will concentrate on recent progress (since 2013) toward preparation of organic-silica hybrid monoliths and their latest applications as extraction and separation media largely focusing on capillary liquid chromatography and capillary electrochromatography. Main emphasis will be given to advancement of approaches relying on the sol-gel chemistry of tetra- and tri-alkoxysilanes, sol-gel chemistry of alkoxysilanes and free-radical copolymerization with organic monomers, and free radical and ring-opening copolymerization of polyhedral oligomeric silsesquioxanes with organic monomers. Hybrid molecularly-imprinted polymer monoliths and hybrid monoliths made with non-silica-based precursors or in combination with metal alkoxides will be included as well.

Porous hybrid organo-silica monoliths have been prepared inside pretreated 100 μm id UV transparent fused-silica capillaries using simultaneous sol-gel transition and polymerization of 3-(methacryloyloxy)propyl trimethoxysilane in the presence of toluene as a porogen. The sol-gel reaction was catalyzed by hydrochloric acid while various photoinitiators including azobisisobutyronitrile, 2,2-dimethoxy-2-phenylacetophenone, and Irgacure 819 were used for the photopolymerization carried out under irradiation with UV light at a wavelength of 254 or 365 nm. The chromatographic performance of photopolymerized monolithic columns in RP liquid chromatographic mode was assessed with respect to the following metrics: column efficiency, methylene and steric selectivity, effect of silanol groups, van Deemter plot, permeability, and pore size distribution. Columns with an efficiency of up to 77 000 plates/m for benzene has been achieved at a flow velocity of 0.47 mm/s. The performance of photopolymerized hybrid monolithic column was compared to the performance of columns prepared via thermally initiated polymerization.

Tuning of preparation conditions, such as variations in the amount of a porogen, concentration of an aqueous acid catalyst, and adjustment in polymerization temperature and time, towards optimized chromatographic performance of thermally polymerized monolithic capillaries prepared from 3-(methacryloyloxy)propyltrimethoxysilane has been carried out. Performance of capillary columns in reversed-phase liquid chromatography was assessed utilizing various sets of solutes. Results describing hydrophobicity, steric selectivity, and extent of hydrogen bonding enabled comparison of performance of hybrid monolithic columns prepared under thermal (TSG) and photopolymerized (PSG) conditions. Reduced amounts of porogen in the polymerization mixture, and prolonged reaction times were necessary for the preparation of monolithic columns with enhanced retention and column efficiency that reached to 111,000 plates/m for alkylbenzenes with shorter alkyl chains. Both increased concentration of catalyst and higher temperature resulted in faster polymerization but inevitably in insufficient time for pore formation. Thermally polymerized monoliths produced surfaces, which were slightly more hydrophobic (a methylene selectivity of 1.28±0.002 TSG vs 1.20±0.002 PSG), with reduced number of residual silanols (a caffeine/phenol selectivity of 0.13±0.001 TSG vs 0.17±0.003 PSG). However, steric selectivity of 1.70±0.01 was the same for both types of columns. The batch-to-batch repeatability was better using thermal initiation compared to monolithic columns prepared under photopolymerized conditions. RSD for retention factor of benzene was 3.7% for TSG capillaries (n=42) vs. 6.6% for PSG capillaries (n=18). A similar trend was observed for columns prepared within the same batch.

The organic polymer-based monolithic columns have been evaluated as the separation media for analysis of peptides using supercritical fluid chromatography–mass spectrometry (SFC–MS). We demonstrate for the first time the SFC–MS separation of a mixture of polypeptides carried out using poly­(styrene-co-divinylbenzene) monolithic columns and carbon dioxide/methanol mobile phase. A gradient from 2 to 40% methanol modifier containing 0.1% TFA as an acidic additive was applied for the optimized elution and the separation was achieved in less than 3 min. Selected ion monitoring enabled detection of selected masses characteristic of three ionophoric pentadecapeptide antibiotics gramicidin A, B, and C and their two corresponding isoforms. Furthermore, their identity was confirmed through determination of their [M + 2H]2+, [M + 2Na]2+, and [M + H + Na]2+ ions acquired by positive-ion electrospray ionization-mass spectrometry (ESI-MS).