Bu çalışmada; ağaç malzemeden yapılan gemi, tekne, yat gibi suyla temas eden odun materyalinin zamanla üzerinde oluşan, biyofilm (mikrop tabakası), fouling (kirlenme), biyofouling (biyolojik kirlenme) tabakaları anlatılmıştır. Bunun yanı sıra ahşap gemi yapımında tercih edilen ağaç türleri ve suyla temas eden ahşap yüzeyinde oluşan mikroorganizmalar ve biyofilm üzerinde durulmuştur. Biyofilm oluşumu beraberinde orada bulunan bakterilerin virülens gücü gemi personelinin sağlığını kötü yönde etkileyecektir ve aynı zamanda ahşap materyali korozyona uğratarak mali anlamda da zarar oluşturacaktır. Bu nedenle biyofilm, fouling, biyofouling oluşumların engellenmesi gemi endüstrisi açısından önem arz etmektedir. Ahşap seçiminde bütün bu doğa tahribatına karşı dayanıklılık esas alınmalıdır. Tekne yapımında kullanılan ağaç malzeme maruz kaldığı hızlı adaptasyonu, higroskopik özelliği, bünyesinde bulundurması gereken nem oranı ve direnç özelliklerine göre belirlenip çalışmanın piyasada rehber olması öngörülmüştür. Bu araştırmada gemi yapımında en uygun ahşap malzemelerin tespitine yardımcı olmak amaçlanmıştır.
Bu çalışmada İstanbul Üniveristesi-Cerrahpaşa Ormancılık Meslek Yüksekokulu (VSF), Mobilya ve Dekorasyon ve Orman Fakültesi, Orman Endüstri Mühendisliği (FIE) Bölümü öğrencilerinin bilgisayar destekli çizim eğitimleri, genel gelişimleri ve gelecekleri hakkındaki görüşleri araştırılmıştır. Anket formu 2020-2021 akademik yılının güz döneminde online olarak uygulanmıştır. Her iki bölümün birinci ve ikinci sınıf öğrencileri ile 60 öğrenciden anketler değerlendirmeye alınmıştır. Anket formunda öğrencilerin demografik özellikleri, eğitimleri ve mesleki gelecekleri ile ilgili görüşleri hakkında sorular yer almıştır. Analiz sırasında önce değişkenler kodlanmış, bir veri tabanı oluşturulmuş ve MS Excel yazılımı ile değerlendirilmiştir. Sonuç olarak; öğrencilerin demografik özellikleri, Orman Endüstrisi Mühendisliği Bölümü öğrencilerinin Orman Endüstri Mühendisliği Bölümü ve Ormancılık Meslek Yüksekokulu Öğrencilerinin Bölümlerine ilişkin görüşleri, öğrencilerin bilgisayar destekli tasarım programlarına ilişkin görüşleri değerlendiirlmiştir. Ayrıca öğrencilerin mezuniyet sonrası çalışmak istedikleri sektörler değerlendirilerek yorumlanmıştır.
Çalışmada çevre sorumluluğu bilinciyle atık tetrapak kağıtları ve PE (Polietilen) atıklar değerlendirilerek yeni bir kompozit malzeme elde edilmiştir. Bu birleştirme işlemi için dolgu maddeleri ve bağlayıcı ajanlar kullanılmıştır. Üretilen levhalar, fiziksel ve mekaniksel bazı özelliklerinin belirlenmesi için standartlara uygun biçimde kesilmiş ve deneysel çalışmalar yapılmıştır. Deneylerden elde edilen sonuçlar, istatistiksel yöntemlerle değerlendirilmiştir. Değerlendirme sonuçlarına göre, Tetrapak maddesine plastik ilave edildiği örneklerde ve bağlayıcı ajan olan maleik anhidritle kraftlanmış polietilen (MAPE) içeren kompozit örneklerinde mekanik direncin arttığı tespit edilmiştir. Eğilme dayanımlarının dolgu maddesinin çeşidi ve oranına bağlı olarak azaldığı, eşleştirici kimyasalların ise bazı deney gruplarının dışında eğilme dayanımını daha da azalttığı, elastikiyet modülü değerlerinde ise dolgu maddeleri ve eşleştiricilerin her ikisinin de değerleri düşürdüğü ancak eşleştirici kimyasalların dolgu maddelerine nazaran bir miktar daha yüksek sonuçlar verdiği tespit edilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.