Objectives Endonasal suturing is an investigational method for dural repair that has been reported to decrease the incidence of cerebrospinal fluid fistula. This method requires handling of single-shaft instrumentation in the narrow endonasal corridor. In this study, we designed a low-cost, surgical model using three-dimensional (3D) printing technology to simulate dural repair through the endonasal corridor and subsequently assess the utility of the model for surgical training. Methods Using an Ultimaker 2+ printer, a 3D-printed replica of the cranial base and nasal cavity was fitted with tissue allograft to recapitulate the dural layer. Residents, fellows, and attending surgeons were asked to place two sutures using a 0-degree endoscope and single-shaft needle driver. Task completion time was recorded. Participants were asked to fill out a Likert scale questionnaire after the experiment. Results Twenty-six participants were separated into groups based on their prior endoscope experience: novice, intermediate, and expert. Twenty-one (95.5%) residents and fellows rated the model as “excellent” or “good” in enhancing their technical skills with endoscopic instrumentation. Three of four (75%) of attendings felt that the model was “excellent” or “good” in usefulness for training in dural suturing. Novice participants required an average of 11 minutes for task completion, as compared with 8.7 minutes for intermediates and 5.7 minutes for experts. Conclusion The proposed model appears to be highly effective in enhancing the endoscopic skills and recapitulating the task of dural repair. Such a low-cost model may be especially important in enhancing endoscopic facility in countries/regions with limited access to cadaveric specimens.
Cerebral spinal fluid (CSF) leakage is a major postoperative complication requiring surgical intervention, resulting in prolonged healing and higher costs. Biocompatible polymers, such as cyanoacrylates, are currently used as tissue adhesives for closing surgical defects and incisions. Coupling these polymers with nanofiber technology shows promising results for generating nanofibers used in wound care, tissue engineering, and drug delivery. Fiber membranes formed by electrospinning of n-octyl-2-cyanoacrylate (NOCA) are investigated for in situ dural closures after neurosurgery to improve the quality of the closure and prevent post-surgical CSF leaks.Electrospun NOCA fiber membranes showed significantly higher sealing capabilities of defects in human dura, with an average burst pressure of 149 mmHg, compared with that of an FDA-approved common dural sealant that had an average burst pressure of 37 mmHg. In this study, microfabrication of NOCA fibers demonstrates a promising technique for dural repairs.
Objective Endonasal dural suturing (EDS) has been reported to decrease the incidence of cerebrospinal fluid fistula. This technique requires handling of single-shaft instrumentation in the narrow endonasal corridor. It has been proposed that three-dimensional (3D) endoscopes were associated with improved depth perception. In this study, we sought to perform a comparison of two-dimensional (2D) versus 3D endoscopy by assessing surgical proficiency in a simulated model of EDS. Materials and Methods Twenty-six participants subdivided into groups based on previous endoscopic experience were asked to pass barbed sutures through preset targets with either 2D (Storz Hopkins II) or 3D (Storz TIPCAM) endoscopes on 3D-printed simulation model. Surgical precision and procedural time were measured. All participants completed a Likert scale questionnaire. Results Novice, intermediate, and expert groups took 11.0, 8.7, and 5.7 minutes with 2D endoscopy and 10.9, 9.0, and 7.6 minutes with 3D endoscopy, respectively. The average deviation for novice, intermediate, and expert groups (mm) was 5.5, 4.4, and 4.3 with 2D and 6.6, 4.6, and 3.0 with 3D, respectively. No significant difference in procedural time or accuracy was found in 2D versus 3D endoscopy. 2D endoscopic visualization was preferred by the majority of expert/intermediate participants, while 3D endoscopic visualization by the novice group. Conclusion In this pilot study, there was no statistical difference in procedural time or accuracy when utilizing 2D versus 3D endoscopes. While it is possible that widespread familiarity with 2D endoscopic equipment has biased this study, preliminary analysis suggests that 3D endoscopy offers no definitive advantage over 2D endoscopy in this simulated model of EDS.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.