No abstract

No abstract

TiO2nanocrystals were prepared by a photo-assisted sol-gel process in which tetrabutoxide titanate was hydrolyzed in acidic medium under ultraviolet irradiation. X-ray diffraction and Raman spectra showed that the as-prepared TiO2particles without further annealing were well-crystallized anatase. Such TiO2particles were easily immobilized on dacron cloth and showed very high photocatalytic activity. In contrast, TiO2particles were ill crystallized and showed lower activity when no light was introduced under otherwise equal conditions.

This paper reports inverted pyramid microstructure-based single-crystalline silicon (sc-Si) solar cell with a conversion efficiency up to 20.19% in standard size of 156.75 × 156.75 mm2. The inverted pyramid microstructures were fabricated jointly by metal-assisted chemical etching process (MACE) with ultra-low concentration of silver ions and optimized alkaline anisotropic texturing process. And the inverted pyramid sizes were controlled by changing the parameters in both MACE and alkaline anisotropic texturing. Regarding passivation efficiency, the textured sc-Si with normal reflectivity of 9.2% and inverted pyramid size of 1 μm was used to fabricate solar cells. The best batch of solar cells showed a 0.19% higher of conversion efficiency and a 0.22 mA cm−2 improvement in short-circuit current density, and the excellent photoelectric property surpasses that of the same structure solar cell reported before. This technology shows great potential to be an alternative for large-scale production of high efficient sc-Si solar cells in the future.Electronic supplementary materialThe online version of this article (10.1186/s11671-018-2502-9) contains supplementary material, which is available to authorized users.