No abstract

No abstract

Black liquor (BL) concentration by multieffect evaporation is an extremely energy-intensive operation in the kraft pulping cycle. Membranes can significantly save energy in this process, but conventional membranes are strongly challenged by low solute rejections and poor stability in BL, which is a complex mixture containing dissolved lignin, other nonlignin organics, multiple inorganic salts at highly alkaline pH, and process temperatures of 70–85 °C. Here we describe in detail the fabrication, modification, and characterization of robust and high-performance graphene oxide (GO) nanofiltration membranes for BL concentration. We show that poly­(ether sulfone) (PES)-supported GO membranes prepared from chemically reduced GO, and then subjected to high-pressure hydraulic compaction, show excellent chemical and mechanical stability under real BL conditions in comparison to conventional GO membranes. These membranes (referred to as “GO-3” in this work) show near-perfect (>99%) lignin rejection, high total organic carbon (TOC) rejection (up to 93%), and greatly improved inorganic rejections especially for divalent anions that are predominant in BL. Finally, the GO-3 membranes are scaled up on larger PES sheets (∼660 cm2 in size) and are operated under realistic cross-flow conditions with real BL feed flow rates as high as 10 L/min at 70 °C. The GO-3 membranes show robust performance over more than 1500 h (60 days) of continuous operation in multiple cycles of 10–50 bar transmembrane pressures, attaining stable and sustained permeate fluxes as high as 25 LMH and excellent rejection performance equal to that obtained at smaller scale. The main results of this work have strong implications on the development of membrane processes for BL dewatering and more generally for processing of complex biorefinery feed streams.

Rechargeable batteries using aqueous electrolyte have intrinsically low flammability and are promising alternatives to lithium ion batteries for mid-and large-scale energy storages. Among aqueous battery anode materials, zinc metal stands out because of the highest energies (5846 Ah/L volumetric capacity, 3 times the amount of a lithium metal anode) and an operating potential near the lower limit of water stability window. However, the rechargeability of Zn anodes is hindered by passivation and dissolution problems associated with the solid-solute-solid transformation during cycling. Here we solve both problems simultaneously by designing a distinctive nanostructured zinc anode in which 100 nm ZnO nanoparticles are wrapped and segmented by graphene oxide (GO) sheets. The small size of primary ZnO nanoparticles prevents passivation, while the GO wrap and segmentation confine soluble Zn(OH) 4 2− intermediates from escaping. This lasagna-like nanostructured Zn anode measured a high volumetric capacity of 2308 Ah/L and achieved a remarkable capacity retention of 86% after 150 cycles. In contrast, the open-structured ZnO nanoparticle anode, without the protection of GO, completely died after 90 cycles.

No abstract

This work compares the structure of industrially isolated lignin samples from kraft pulping and three alternative processes: butanol organosolv, supercritical water hydrolysis, and sulfur dioxide/ethanol/water fractionation. Kraft processes are known to produce highly condensed lignin, with reduced potential for catalytic depolymerization, whereas the alternative processes have been hypothesized to impact the lignin less. The structural properties most relevant to catalytic depolymerization are characterized by elemental analysis, quantitative 13C and 2 D HQSC NMR spectroscopy, gel permeation chromatography, and thermogravimetric analysis. Quantification of the β‐O‐4 ether bond content shows partial depolymerization, with all samples having less than 12 bonds per 100 aromatic units. This results in theoretical monomer yields of less than 5 %, strongly suggesting the alternative fractionation processes generate highly condensed lignin structures that are no more suitable for catalytic depolymerization than kraft lignin. However, the different thermal degradation profiles suggest there are physicochemical differences that could be leveraged in other valorization strategies.

Titanocene dichloride (Cp2TiCl2)/KI was developed to be an efficient catalytic system for the cycloaddition of CO2 to epoxides to synthesize relevant cyclic carbonates from epoxides and CO2. Various influencing factors on the coupling reaction, such as co‐catalyst, temperature, CO2 pressure and reaction time, were investigated. The optimal reaction conditions were KI as co‐catalyst, 150 °C reaction temperature, 12 atm CO2 pressure and 4 h reaction time using THF as solvent for the synthesis of propylene carbonate in 98% yield. Copyright © 2013 John Wiley & Sons, Ltd.

This paper presents an investigation of the use of a volume-choke-volume low-pass filter to achieve gas pulsation attenuation in a reciprocating compressor piping system, with a focus on its frequency response characteristics and influence on the actual attenuation effects. A three-dimensional acoustic model of the gas pulsation was established for a compressor discharge piping system with and without the volume-choke-volume filter, based on which the gas column natural frequencies of the piping system and the pressure wave profiles were predicted by means of the finite element method. The model was validated by comparing the predicted results with the experimental data. The results showed that the characteristic frequency of the filter was sensitive to both diameter and length of the choke but independent of the parameters of the piping beyond the filter. It is worth noting that the characteristic frequency of the filter constituted one order of the gas column natural frequencies of the piping system with the filter. The pressure pulsation levels in the piping system downstream of the filter could be significantly attenuated especially for the pulsation components at frequencies above the filter’s characteristic frequency. The measured peak-to-peak pressure pulsation at the outlet of the filter was approximately 61.7% lower than that of the surge bottle with the same volume.