No abstract

Designing topological and geometrical structures with extended unnatural parameters (negative, near-zero, ultrahigh, or tunable) and counterintuitive properties is a big challenge in the field of metamaterials, especially for relatively unexplored materials with multiphysics coupling effects. For natural piezoelectric ceramics, only five nonzero elements in the piezoelectric matrix exist, which has impeded the design and application of piezoelectric devices for decades. Here, we introduce a methodology, inspired by quasi-symmetry breaking, realizing artificial anisotropy by metamaterial design to excite all the nonzero elements in contrast to zero values in natural materials. By elaborately programming topological structures and geometrical dimensions of the unit elements, we demonstrate, theoretically and experimentally, that tunable nonzero or ultrahigh values of overall effective piezoelectric coefficients can be obtained. While this work focuses on generating piezoelectric parameters of ceramics, the design principle should be inspirational to create unnatural apparent properties of other multiphysics coupling metamaterials.

Piezoelectric ceramic devices, which utilize multifarious vibration modes to realize electromechanical coupling and energy conversions, are extensively used in high‐technological fields. However, the excitation of basic modes is mainly subjected to natural eigenfrequency of ceramic devices, which is related to the structure and material parameters. Herein, inspired by metamaterial theory, a programmable, 3D ordered structure with piezoceramic strain units (3D OSPSU) is developed to artificially generate basic modes in a broad frequency band other than only in narrow eigenfrequency. A (2 × 2 × 2) arrayed, co‐fired, multilayer 3D OSPSU is painstakingly designed and fabricated for generating basic modes, such as flexural, extension, shear, torsion, and even coupled modes at nonresonance. To validate the 3D OSPSU method, a five‐degree‐of‐freedom micro–nano actuating platform based on only one co‐fired multilayer ceramic is constructed. The proposed methodology provides a new paradigm for creating extraordinary material properties of piezoelectric ceramics and will inspire brand‐new piezoelectric device designs.

Tremendous progress has been made in boosting the realization of magnetoelectric (ME) magnetometers based on the direct ME effect (DME) for bulk ME laminates. In this work, we studied the potential of an electrically driven bulk magnetic field sensor based on the converse ME effect (CME). Starting from a discussion about the dependence of the induced voltage from the pickup coil on coil parameters and the CME coupling process, we then experimentally measured the optimized bias field in the off resonance region and observed the double-peak phenomenon that occurred within the resonance window. More importantly, the optimization with respect to the sample's dimension, excitation voltage, and frequency was conducted to improve the sensing capability for low-frequency magnetic fields. It was experimentally found that a limit of detection (LoD) of ∼115 pT for a magnetic field of 10 Hz and ∼300 pT for a magnetic field of 1 Hz was achieved when exciting the ME laminate at 1 V without any bias field. In this case, the power consumption for the ME laminate is only 0.56 mW, which is much lower compared to tens of milliwatts (10–100 mW) for optically pumped or flux gate sensors (excluding the power consumption from the electronics) and also shows advantages over conventional ME magnetic field sensors based on DME with a current pump.

In this work, we theoretically and experimentally report a NdFeB magnet/piezoelectric composite cantilever with varying stiffness for enhancing magneto-mechano-electric (MME) coupling under weak AC magnetic field Hac excitation. Measurement results show that the MME composite cantilever can produce a relatively high peak-peak output power of 12.8 mW and a peak-peak current of 0.735 mApp under Hac = 7 Oe at a resonance frequency of 36 Hz. Even when Hac is as low as 0.2 Oe, equivalent to the level of the earth magnetic field, it can still drive 4 LED lighting. The obtained results are obviously superior to previous reports, confirming the MME cantilever harvester has potential to harvest the stray magnetic field energy from electrical power cables for continuously powering wireless sensor networks.