The use of water as an oxygen and hydrogen source for the paired oxygenation and hydrogenation of organic substrates to produce valuable chemicals is of utmost importance as a means of establishing green chemical syntheses. Inspired by the active Ni
3+
intermediates involved in electrocatalytic water oxidation by nickel‐based materials, we prepared NiB
x
as a catalyst and used water as the oxygen source for the oxygenation of various organic compounds. NiB
x
was further employed as both an anode and a cathode in a paired electrosynthesis cell for the respective oxygenation and hydrogenation of organic compounds, with water as both the oxygen and hydrogen source. Conversion efficiency and selectivity of ≥99 % were observed during the oxygenation of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic acid and the simultaneous hydrogenation of
p
‐nitrophenol to
p
‐aminophenol. This paired electrosynthesis cell has also been coupled to a solar cell as a stand‐alone reactor in response to sunlight.
Novel LaCO3OH microspheres with the hexagonal phase were synthesized by a hydrothermal method using La(NO3)(3).6H2O and urea CO(NH2)2 as the starting materials. Various experimental parameters were examined, such as the reaction temperature, the reaction time, and the molar ratios of the starting reagents. The as-synthesized products were characterized by powder X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence (PL). The PL result showed one broad emission band centered at 438 nm (lambdaex=365 nm) of the pure LaCO3OH microspheres. In addition, a possible formation mechanism of LaCO3OH microspheres and the PL property of pure LaCO3OH microspheres were discussed.
Novel slight yellow CeO2single/multiwall hollow microspheres were synthesized by the hydrothermal method without any surfactant and characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscopy (FESEM), and x-ray photoelectron spectra (XPS). The results showed that the products were CeO2single/multiwall hollow microspheres, the shells of which were composed of CeO2nanoparticles with a mean size of 70 nm. The effect of the preparation conditions, the reaction temperature, the reaction time, and the molar ratios of urea to Ce(NO3)3·6H2O on the morphology of the products, was investigated. The optimal preparation conditions are determined as follows: the reaction temperature of 230 °C, the reaction time of 6 to 10 h, and the molar ratios of urea to Ce(NO3)3·6H2O of 3:1 to 6:1. The formation mechanism of CeO2single/multiwall hollow microspheres was proposed. The ultraviolet-visible (UV-VIS) diffuse reflectance spectra of the samples were measured. The results showed that the absorption edges of the samples were red-shifted compared with that of bulk CeO2, and that the red-shift of the absorption edges and the yellow of the samples enhanced with increasing the yield of CeO2single/multiwall hollow microspheres. The catalytic activity and the recycling performance of the sample on CO oxidation were tested and theT100%(the temperature at which CO 100% conversion) was 230 °C in the first run and decreased by 270 and 205 °C compared with that of bulk CeO2and CeO2nanocrystal, respectively.
Electrochemical oxidation using renewable energy is an attractive strategy that provides a sustainable and mild approach for biomass transformation. Herein, the electrocatalytic oxidation of furfuryl alcohol in an aqueous solution was investigated using CuO nanorods. Two kinds of Cu III intermediates, namely, (CuO 2 ) − and (Cu 2 O 6 ) 6− , were detected on the surface of the working electrode. (Cu 2 O 6 ) 6− , generated in the potential range of 1.35−1.39 V versus the reversible hydrogen electrode (RHE), induced the oxidation of furfuryl alcohol to furaldehyde with a yield of ≥98%. (CuO 2 ) − , generated at a potential greater than 1.39 V versus RHE, which led to the oxidation of furfuryl alcohol to 2-furoic acid with a yield of ≥99%. Furthermore, the Cu III -catalyzed system exhibited a measure of universal applicability, wherein (Cu 2 O 6 ) 6− and (CuO 2 ) − induced the highly selective electro-oxidation of benzyl alcohol, vanillyl alcohol, and 4-pyridinemethanol to yield the corresponding aldehydes and acids, respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.