Flashback is the main operability issue associated with converting lean, premixed combustion systems from operation on natural gas to operation on high hydrogen content fuels. Most syngas fuels contain some amount of hydrogen (15-100%) depending on the fuel processing scheme. With this variability in the composition of syngas, the question of how fuel composition impacts flashback propensity arises. To address this question, a jet burner configuration was used to develop systematic data for a wide range of compositions under turbulent flow conditions. The burner consisted of a quartz burner tube confined by a larger quartz tube. The use of quartz allowed visualization of the flashback processes occurring. Various fuel compositions of hydrogen, carbon monoxide, and natural gas were premixed with air at equivalence ratios corresponding to constant adiabatic flame temperatures (AFT) of 1700K and 1900K. Once aflame was stabilized on the burner, the air flow rate would be gradually reduced while holding the AFT constant via the equivalence ratio until flashback occurred. Schlieren and intensified OH* images captured at high speeds during flashback allowed some additional understanding of what is occurring during the highly dynamic process of flashback. Confined and unconfined flashback data were analyzed by comparing data collected in the present study with existing data in the literature. A statistically designed test matrix was used which allows analysis of variance of the results to be carried out, leading to correlation between fuel composition and flame temperature with (1) critical flashback velocity gradient and (2) burner tip temperature. Using the burner tip temperature as the unburned temperature in the laminar flame speed calculations showed increased correlation of the flashback data and laminar flame speed as opposed to when the actual unburned gas temperature was tised.

Flashback is the main operability issue associated with converting lean, premixed combustion systems from operation on natural gas to operation on high hydrogen content fuels. Most syngas fuels contain some amount of hydrogen (15–100%) depending on the fuel processing scheme. With this variability in the composition of syngas, the question of how fuel composition impacts flashback propensity arises. To address this question, a jet burner configuration was used to develop systematic data for a wide range of compositions under turbulent flow conditions. The burner consisted of a quartz burner tube confined by a larger quartz tube. The use of quartz allowed visualization of the flashback processes occurring. Various fuel compositions of hydrogen, carbon monoxide, and natural gas were premixed with air at equivalence ratios corresponding to constant adiabatic flame temperatures (AFT) of 1700 K and 1900 K. Once a flame was stabilized on the burner, the air flow rate would be gradually reduced while holding the AFT constant via the equivalence ratio until flashback occurred. Schlieren and intensified OH* images captured at high speeds during flashback allowed some additional understanding of what is occurring during the highly dynamic process of flashback. Confined and unconfined flashback data were analyzed by comparing data collected in the present study with existing data in the literature. A statistically designed test matrix was used which allows analysis of variance of the results to be carried out, leading to correlation between fuel composition and flame temperature with (1) critical flashback velocity gradient and (2) burner tip temperature. Using the burner tip temperature as the unburned temperature in the laminar flame speed calculations showed increased correlation of the flashback data and laminar flame speed as opposed to when the actual unburned gas temperature was used.

No abstract

Flashback is a key operability issue for low emission premixed combustion systems operated on high hydrogen content fuels. Frevious work investigated fuel composition impacts on flasliback propensity and found that burner tip temperature was important in correlating flashback data in premixed jet flames. An enclosure around tiie jet flame was found to enhance the flame-burner rim interaction. The present study further addresses these issues using a jet burner with various geometric configurations and interchangeable materials. Systematic studies addressing the quantitative influence of various parameters such as tip temperature, burner material, enclosure size, and burner diameter on flashback propensity were carried out. A comprehensive overview of the flashback limits for all conditions tested in the current study as well as those published previously is given. Tlie collective results indicate that the burner materials, tip temperature, and flame confinement play significant roles for flashback propensity and thus help explain previous scatter in flashback data. Furthermore, the present work indicates that the upstream flame propagation during flashback is affected by the burner material. The material with lower thermal conductivity yields larger flashback propensity but slower flame regression inside the tube. These observations can be potentially exploited to minimize the negative impacts of flashback in practical applications.

Flashback is a key operability issue for low emission premixed combustion systems operated on high hydrogen content fuels. Previous work investigated fuel composition impacts on flashback propensity and found that burner tip temperature was important in correlating flashback data in premixed jet flames. An enclosure around the jet flame was found to enhance the flame-burner rim interaction. The present study further addresses these issues using a jet burner with various geometric configurations and interchangeable materials. Systematic studies addressing the quantitative influence of various parameters such as tip temperature, burner material, enclosure size, and burner diameter on flashback propensity were carried out. A comprehensive overview of the flashback limits for all conditions tested in the current study as well as those published previously is given. The collective results indicate that the burner materials, tip temperature and flame confinement play significant roles for flashback propensity and thus help explain previous scatter in flashback data. Furthermore, the present work indicates that the upstream flame propagation during flashback is affected by the burner material. The material with lower thermal conductivity yields larger flashback propensity but slower flame regression inside the tube. These observations can be potentially exploited to minimize the negative impacts of flashback in practical applications.

Flashback is a key challenge for low NOx premixed combustion of high hydrogen content fuels. Previous work on jet burner configurations has systematically investigated the impact of fuel composition on flashback propensity, and noted that burner tip temperature played an important role on flashback, yet did not quantify any specific effect (Shaffer, B., Duan, Z., and McDonell, V., 2013, “Study of Fuel Composition Effects on Flashback Using a Confined Jet Flame Burner,” ASME J. Eng. Gas Turb. Power, 135(1), p. 011502). The present work further investigates the coupling of flashback with burner tip temperature and leads to models for flashback propensity as a function of parameters studied. To achieve this, a jet burner configuration with interchangeable burner materials was developed along with automated flashback detection and rim temperature monitoring. An inline heater provides preheated air up to 810 K. Key observations include that for a given condition, tip temperature of a quartz burner at flashback is higher than that of a stainless burner. As a result, the flashback propensity of a quartz tube is about double of that of a stainless tube. A polynomial model based on analysis of variance is presented and shows that, if the tip temperature is introduced as a parameter, better correlations result. A physical model is developed and illustrates that the critical velocity gradient is proportional to the laminar flame speed computed using the measured tip temperature. The addition of multiple parameters further refined the prediction of the flashback propensity, and the effects of materials are discussed qualitatively using a simple heat transfer analysis.

Flashback is a key challenge for low NOx premixed combustion of high hydrogen content fuels. Previous work has systematically investigated the impact of fuel composition on flashback propensity, and noted that burner tip temperature played an important role on flashback, yet did not quantify any specific effect. The present work further investigates the coupling of flashback with burner tip temperature and leads to models for flashback propensity as a function of parameters studied. To achieve this, a jet burner configuration with interchangeable burner materials was developed along with automated flashback detection and rim temperature monitoring. An inline heater provides preheated air up to 810 K. Key observations include that for a given condition, tip temperature of a quartz burner at flashback is higher than that of a stainless burner. As a reasult, the flashback propensity of a quartz tube is about double of that of a stainless tube. A polynomial model based on analysis of variance is presented and shows that, if the tip temperature is introduced as a parameter, better correlations result. A physical model is developed and illustates that the critical velocity gradient is proportional to the laminar flame speed computed using the measured tip temperature. Addition of multiple parameters further refined the prediction of the flashback propensity, and the effects of materials are discussed qualitatively using a simple heat transfer analysis.

Introduction: Keratosis pilaris (KP) is a disfiguring disease and is resistant to treatment. Several treatment methods are available, but the efficacy is limited. This prospective, rater-blinded, split-body comparative study investigated the efficacy and safety of long-pulsed 755-nm alexandrite laser in the treatment of KP. Methods: Twenty-two patients with KP of bilateral arms were enrolled in this study. All participants were randomized and treated with a long-pulsed 755-nm alexandrite laser on the left or right arm in four sessions held 3 weeks apart. The unified moisturizing lotion was applied on both left and right arms once a day. Physicians' assessment scores and patients' selfassessment scores were recorded, and skin imaging changes in dermoscopy, high-frequency ultrasound, and skin biopsy were obtained at baseline and 4 weeks after the fourth treatment. Results: Of the 21 patients who completed the study, 15 were women and 6 were men. At 4 weeks after the fourth treatment, the laser side