The preparation of high‐quality perovskite films with low grain boundaries and defect states is a prerequisite for achieving high‐efficiency perovskite solar cells (PSCs) with good environmental stability. An effective additive engineering strategy has been developed for simultaneous defect passivation and crystal growth of CsPbBr3 perovskite films by introducing 1,3,5‐triazine‐2,4,6‐triamine (melamine) into the PbBr2 precursor solution. The resultant melamine–PbBr2 film has a loose, large‐grained structure and decreased crystallinity, which has a positive effect on the crystallization process of the perovskite as it retards the crystallization rate as a result of the interaction between melamine and lead ions. Additionally, the passivation by melamine gives a high‐quality CsPbBr3 perovskite film with fewer grain boundaries, lower defect densities, and better energy level matching is achieved by multistep liquid‐phase spin‐coating, which greatly suppresses the nonradiative recombination resulting from the defects and promotes charge extraction at the interface. A champion power conversion efficiency as high as 9.65 % with a promising open‐circuit voltage of 1.584 V is achieved for PSCs with an architecture of fluorine‐doped tin oxide/c‐TiO2/m‐TiO2/melamine‐added CsPbBr3/carbon‐based hole‐transporting layer. Furthermore, the unencapsulated melamine‐added CsPbBr3 PSC shows superior thermal and humidity stability in ambient air at 85 °C or 85 % relative humidity over 720 h.
The carrier recombination loss induced by defects, imperfect contact as well as energy level barriers at buried interface severely restricts the greater advancement of comprehensive performance of perovskite solar cells...
Ferroelectric hysteresis loops, remanent polarization, coercive field, and leakage current characteristics were investigated by increasing the film thickness (from 103 nm to 401 nm) of predominantly (117)-oriented Bi3.15Nd0.85Ti3O12 films. The thickness dependence of the coercive fields shows log coercive field vs. log thickness with a slope of approximately −0.65, which is characteristics of the Kay–Dunn scaling law. The films exhibited very low leakage current on the order of 10−7A/cm2 at an applied electric field of 100 kV/cm. Without a discernible thickness-dependence behavior, the leakage current characteristics, including both Schottky emission and space-charge-limited conduction, were well described by a modified Schottky contact model.
All-inorganic CsPbBr3 perovskite solar cells (PSCs) without hole-transport materials (HTMs) have attracted widespread attention because of their significant environmental stability. However, the poor quality of perovskite film and the energetics...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.