The effect of vacuum annealing on the properties of graphene is investigated by using Raman spectroscopy and electrical measurement. Heavy hole doping on graphene with concentration as high as 1.5 × 10 13 cm −2 is observed after vacuum annealing and exposed to an air ambient. This doping is due to the H 2 O and O 2 adsorption on graphene, and graphene is believed to be more active to molecular adsorption after annealing. Such observation calls for special attention in the process of fabricating graphene-based electronic devices and gas sensors. On the other hand, because the quality of graphene remains high after the doping process, this would be an efficient and controllable method to introduce heavy doping in graphene, which would greatly help on its application in future electronic devices.

Charged impurity (CI) scattering is one of the dominant factors that affect the carrier mobility in graphene. In this paper, we use Raman spectroscopy to probe the charged impurities in suspended graphene. We find that the 2D band intensity is very sensitive to the CI concentration in graphene, while the G band intensity is not affected.The intensity ratio between the 2D and G bands, I 2D /I G , of suspended graphene is much stronger compared to that of non-suspended graphene, due to the extremely low CI concentration in the former. This finding is consistent with the ultra-high carrier mobility in suspended graphene observed in recent transport measurements. Our results also suggest that at low CI concentrations that are critical for device applications, the I 2D /I G ratio is a better criterion in selecting high quality single layer graphene samples than is the G band blue shift.

Gold nanoparticles owe a large number of their properties to their ligand shell. Indeed, many researchers routinely use mixtures of ligand molecules for their nanoparticles to impart complex property sets. It has been shown that the morphology of ligand shells (e.g., Janus, random, stripelike) leads to specific properties. Examples include wettability, solubility, protein nonspecific adsorption, cell penetration, catalysis, and cation-capturing abilities. Yet, it remains a great challenge to evaluate such morphologies in even the most fundamental terms such as dimension and shape. In this Account, we review recent progress in characterization techniques applicable to gold nanoparticles with ligand shells composed of mixed ligands. We divide the characterization into three major categories, namely, microscopy, spectroscopy, and simulation. In microscopy, we review progresses in scanning tunneling microscopy (STM), atomic force microscopy (AFM), and scanning/transmission electron microscopy. In spectroscopy, we mainly highlight recent achievements in nuclear magnetic resonance (NMR), mass spectrometry (MS), small angle neutron scattering (SANS), electron spin resonance (EPR), and adsorption based spectroscopies. In simulation, we point out the latest results in understanding thermodynamic stability of ligand shell morphology and emphasize the role of computer simulation for helping interpretation of experimental data. We conclude with a perspective of future development.

Central airway obstruction is a life-threatening disorder causing a high physical and psychological burden to patients. Standard-of-care airway stents are silicone tubes, which provide immediate relief but are prone to migration. Thus, they require additional surgeries to be removed, which may cause tissue damage. Customized bioresorbable airway stents produced by 3D printing would be highly needed in the management of this disorder. However, biocompatible and biodegradable materials for 3D printing of elastic medical implants are still lacking. Here, we report dual-polymer photoinks for digital light 3D printing of customized and bioresorbable airway stents. These stents exhibit tunable elastomeric properties with suitable biodegradability. In vivo study in healthy rabbits confirmed biocompatibility and showed that the stents stayed in place for 7 weeks after which they became radiographically invisible. This work opens promising perspectives for the rapid manufacturing of the customized medical devices for which high precision, elasticity, and degradability are sought.

The ligand shell (LS) determines a number of nanoparticles’ properties. Nanoparticles’ cores can be accurately characterized; yet the structure of the LS, when composed of mixture of molecules, can be described only qualitatively (e.g., patchy, Janus, and random). Here we show that quantitative description of the LS’ morphology of monodisperse nanoparticles can be obtained using small-angle neutron scattering (SANS), measured at multiple contrasts, achieved by either ligand or solvent deuteration. Three-dimensional models of the nanoparticles’ core and LS are generated using an ab initio reconstruction method. Characteristic length scales extracted from the models are compared with simulations. We also characterize the evolution of the LS upon thermal annealing, and investigate the LS morphology of mixed-ligand copper and silver nanoparticles as well as gold nanoparticles coated with ternary mixtures. Our results suggest that SANS combined with multiphase modeling is a versatile approach for the characterization of nanoparticles’ LS.

No abstract

Central airway obstruction is a life-threatening disorder causing a high physical and psychological burden to patients due to severe breathlessness and impaired quality of life. Standard-of-care airway stents are silicone tubes, which cause immediate relief, but are prone to migration, especially in growing patients, and require additional surgeries to be removed, which may cause further tissue damage. Customized airway stents with tailorable bioresorbability that can be produced in a reasonable time frame would be highly needed in the management of this disorder. Here, we report poly(D,L lactide-co-ε-caprolactone) methacrylate blends based biomedical inks and their use for the rapid fabrication of customized and bioresorbable airway stents. The 3D printed materials are cytocompatible and exhibit silicone-like mechanical properties with suitable biodegradability. In vivo studies in healthy rabbits confirmed biocompatibility and showed that the stents stayed in place for 7 weeks after which they became radiographically invisible. The developed biomedical inks open promising perspectives for the rapid manufacturing of the customized medical devices for which high precision, tuneable elasticity and predictable degradation are sought after.

Ligand exchange reactions are used to achieve nanoparticles coated with a mixture of ligand molecules. Currently, nothing is known on the evolution of the morphology of the ligand shell during the reaction. Here, we use a recently developed method (based on MALDI-TOF) to follow the evolution of the ligand shell composition and morphology during the reaction. We observe the expected evolution in composition and we find that the ligand shell starts as a random mixture and gradually evolves towards a patchy morphology. When the composition has reached a plateau (i.e. when the reaction is generally assumed to be finished), the ligand shell morphology keeps evolving for days, slowly approaching its equilibrium configuration.