Appropriately measuring information literacy skills is essential to understand their educational impact as well as exploring pedagogies to improve teaching of these skills. This paper reports findings of a baseline study to understand the information literacy level of secondary school students in Singapore. A comprehensive instrument encompassing a new dimension of ethical usage of information as well as major IL principles and guidelines was developed for data collection. A total of 298 responses were gathered through the online survey. The findings indicate that overall there was a scope to improve students’ IL skills. That stated, higher order IL skills (such as information use, synthesis, and evaluation) demand more attention, as comparatively lower levels of proficiency were observed in this study.
A broad beamwidth stacked patch antenna with wide circularly polarised (CP) bandwidth is presented. The proposed antenna consists of a stacked structure with a rectangular shell under its ground structure to obtain CP characteristics and wide beamwidth. The radiation quality is excellent over the entire upper hemisphere. The 3 dB beamwidth of the proposed antenna on 2.4 GHz is larger than 140°. Moreover, the CP bandwidth, determined from the 3 dB axial ratio, is found to be about 240 MHz. CP bandwidth of 10.2% and the impedance bandwidth of 52.8% centred on 2.4 GHz are obtained. The proposed antenna is a good candidate for wide angle scanning phased arrays.Introduction: Microstrip patch antennas (MPAs) are widely used in current and future mobile communication systems which require small, low-profile and low-cost antennas. Moreover, with the development of communication and radar systems, wide beamwidth antennas have absorbed in burgeoning concern. To increase the 3 dB beamwidth of the MPA, many effective techniques have been employed. According to [1][2][3][4], many theoretical studies of the finite ground-plane effects on microstrip antenna radiation characteristics have been conducted. These studies have illustrated that the structure and dimensions of the antenna's ground plane can control the radiation patterns of the microstrip antenna.A circularly polarised (CP) microstrip antenna mounted on a threedimensional square structure is introduced in [5]. The antenna consists of a three-layer ground structure that makes the 3 dB beamwidth of CP radiation larger than 110°. In [6], it is illustrated that a curved grounding structure can increase both the impedance bandwidth and the beamwidth of the patch antenna. In [7], a corner-truncated squarepatch CP antenna mounted on a pyramidal ground plane and partially enclosed by a flat conducting wall is introduced. To make a wide beamwidth CP antenna lightweight and of low profile, the work presented in [8] uses a folded conducting wall to reduce the height of the CP antenna to about 0.04λ and meanwhile provides a 3 dB CP radiation beamwidth of about 106°. However, the inherent narrow bandwidth of the microstrip antennas is one of their major drawbacks. The CP bandwidth of the antenna presented in [5] is about 1.5% referenced to the centre frequency at 2323 MHz. Moreover, the impedance bandwidth and 3 dB axial ratio (AR) bandwidth of the antennas proposed in [7,8] are only about 2 and 5%. In the practical design of CP antennas, however, techniques for achieving wideband polarisation characteristics, as well as wideband impedance characteristics, are of great importance. A microstrip-monopole antenna is proposed in [9], where the beamwidth and bandwidth are obtained by loading four cylinders which are perpendicular to the radiating patch. Reference [10] illustrates a broadband dual CP patch antenna with wide beamwidth, which is excited by four crossslots via a microstrip line. The 10 dB impedance bandwidth is 24% and the 3 dB AR bandwidth is 16%. On the other hand, stack...
A design of dual-band transmission-type linear-to-circular polarisation converter based on frequency selective surfaces (FSSs) has been presented in this study. The proposed converter is implemented by cascading a two-dimensional periodic array of split-ring resonators bisected by metal strips and an array of rectangular patches surrounded by rectangular microstrip rings. The structure composed of metal layers and dielectric layers is designed to behave differently for field components of the two orthogonal polarisations and transmit a circularly polarised wave once illuminated by a linearly polarised plane wave within two frequency bands. Using the equivalent circuit models of the FSSs, the operating principle of the converter is presented and discussed in detail. Also, as an illustrating example, a prototype of the proposed polarisation converter operating in two frequency bands of 6.4-8.8 GHz and 12.1-13.9 GHz is simulated, fabricated and experimentally characterised. The measurement results demonstrate that the dual-band polarisation converter operates <3 dB axial ratio in a field view of ±25° with fractional bandwidths of 31.6 and 13.8%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.