Improving stability is a major aspect for commercial application of perovskite solar cells (PSCs). The all-inorganic CsPbBr3 perovskite material has been proven to have excellent stability. However, the CsPbBr3 film has a small range of light absorption and serious charge recombination at the interface or inside the device, so the power conversion efficiency is still lower than that of the organic–inorganic hybrid one. Here, we successfully fabricate high-quality CsPbBr3 films via additive engineering with NH4SCN. By incorporating NH4 + and pseudo-halide ion SCN– into the precursor solution, a smooth and dense CsPbBr3 film with good crystallinity and low trap state density can be obtained. At the same time, the results of a series of photoluminescence and electrochemical analyses including electrical impedance spectroscopy, space-charge limited current method, Mott–Schottky data, and so on reveal that the NH4SCN additive can greatly reduce the trap state density of the CsPbBr3 film and also effectively inhibit interface recombination and promote charge transport in the CsPbBr3 planar PSC. Finally, the CsPbBr3 planar PSC prepared with a molar ratio of 1.5% NH4SCN achieves a champion efficiency of 8.47%, higher than that of the pure one (7.12%).

No abstract

Although perovskite solar cells have achieved the highest 25.2% efficiency, they suffer from poor stability because the organic–inorganic hybrid perovskites are easily decomposed under the attacks of oxygen, moisture, heat and ultraviolet light.

Black soil is fertile, abundant with organic matter (OM) and is exceptional for farming. The black soil zone in northeast China is the third-largest black soil zone globally and produces a quarter of China’s commodity grain. However, the soil organic matter (SOM) in this zone is declining, and the quality of cultivated land is falling off rapidly due to overexploitation and unsustainable management practices. To help develop an integrated protection strategy for black soil, this study aimed to identify the primary factors contributing to SOM degradation. The geographic detector, which can detect both linear and nonlinear relationships and the interactions based on spatial heterogeneous patterns, was used to quantitatively analyze the natural and anthropogenic factors affecting SOM concentration in northeast China. In descending order, the nine factors affecting SOM are temperature, gross domestic product (GDP), elevation, population, soil type, precipitation, soil erosion, land use, and geomorphology. The influence of all factors is significant, and the interaction of any two factors enhances their impact. The SOM concentration decreases with increased temperature, population, soil erosion, elevation and terrain undulation. SOM rises with increased precipitation, initially decreases with increasing GDP but then increases, and varies by soil type and land use. Conclusions about detailed impacts are presented in this paper. For example, wind erosion has a more significant effect than water erosion, and irrigated land has a lower SOM content than dry land. Based on the study results, protection measures, including conservation tillage, farmland shelterbelts, cross-slope ridges, terraces, and rainfed farming are recommended. The conversion of high-quality farmland to non-farm uses should be prohibited.