Butanol is an important solvent and transport fuel additive, and can be produced by microbial fermentation. Attempts to generate a superior microbial producer of butanol have been made through different metabolic engineering strategies. However, to date, butanol bio-production is still not economically competitive compared to petrochemical-derived production because of its major drawbacks, such as, high cost of the feedstocks, low butanol concentration in the fermentation broth and the co-production of low-value by-products acetone and ethanol. Here we analyze the main bottlenecks in microbial butanol production and summarize relevant advances from recently reported studies. Further needs and directions for developing real industrially applicable strains in butanol production are also discussed.

A green, highly efficient and low-cost nitrogen-doped soybean metal carbon (SBMC) catalyst obtained from the simple carbonization of biomass soybean meal (SBM) in the presence of zinc chloride.

The production of vinyl chloride (VCM) by pyrolysis of 1,2-dichloroethane (DCE) is an important process in the ethylene-based poly(vinyl chloride) industry. The pyrolysis is performed at temperatures above 500 °C, gives low conversions, and has high energy consumption. We have shown that N-doped carbon catalysts give excellent performances in DCE dehydrochlorination at 280 °C. The current understanding of the active sites, mechanism, and kinetics of DCE dehydrochlorination over N-doped carbon catalysts is limited. Here, we showed that pyridinic-N on a N-doped carbon catalyst is the active site for catalytic production of vinyl chloride monomer from DCE. The results of CO2 and DCE temperature-programmed desorption experiments showed that the pyridinic-N catalytic sites are basic, and the mechanism of dehydrochlorination on a N-doped carbon catalyst involves a carbanion. A kinetic study of dehydrochlorination showed that the surface reaction rate on the N-doped carbon catalyst was the limiting step in the catalytic dehydrochlorination of DCE. This result enabled clarification of the dehydrochlorination mechanism and optimization of the reaction process. These findings will stimulate further studies to increase our understanding of the relationship between the base strength and catalytic performance. The results of this study provide a method for catalyst optimization, namely modification of the amount of pyridinic-N and the base strength of the catalyst, to increase the surface reaction rate of DCE dehydrochlorination on N-doped carbon catalysts.

Metal-free catalysts synthesized by impregnating activated carbons with B3N3-containing arylacetylene resin showed good catalytic performance for industrial dehydrochlorination of 1,2-dichloroethane to produce vinyl chloride monomer.

No abstract

Vinyl chloride, the monomer of polyvinyl chloride, is produced primarily via acetylene hydrochlorination catalyzed by environmentally toxic carbon-supported HgCl2. Recently, nitrogen-doped carbon materials have been explored as metal-free catalysts to substitute toxic HgCl2. Herein, we describe the development of a cationic covalent triazine network (cCTN, cCTN-700) that selectively catalyzes acetylene hydrochlorination. cCTN-700 exhibited excellent catalytic activity with initial acetylene conversion, reaching ~99% and a vinyl chloride selectivity of >98% at 200 °C during a 45 h test. X-ray photoelectron spectroscopy, temperature programmed desorption, and charge calculation results revealed that the active sites for the catalytic reaction were the carbon atoms bonded to the pyridinic N and positively charged nitrogen atoms (viologenic N+) of the viologen moieties in cCTN-700, similar to the active sites in Au-based catalysts but different from the those in previously reported nitrogen-doped carbon materials. This research focuses on using cationic covalent triazine polymers for selective acetylene hydrochlorination.