This paper describes a lattice Boltzmann-based binary fluid model for inkjet printing. In this model, a time-dependent driving force is applied to actuate the droplet ejection. As a result, the actuation can be accurately controlled by adjusting the intensity and duration of the positive and negative forces, as well as the idle time. The present model was verified by reproducing the actual single droplet ejection process captured by fast imaging. This model was subsequently used to investigate droplet formation in piezoelectric inkjet printing. It was determined that the wettability of the nozzle inner wall and the surface tension of the ink are vital factors controlling the print quality and speed. Increasing the contact angle of the nozzle inner delays the droplet breakup time and reduces the droplet velocity. In contrast, higher surface tension values promote earlier droplet breakup and faster drop velocity. These results indicate that the hydrophilic modification of the nozzle inner wall and the choice of inks with high surface tensions will improve printing quality.

PACS 47.11.-j -Computational methods in fluid dynamics PACS 05.70.Ce -Thermodynamic functions and equations of state PACS 68.03.Cd -Surface tension and related phenomena Abstract -A lattice Boltzmann model to simulate phase separation and two-phase flow is proposed. The nonideal force in multiphase flow is directly computed from the free energy. Thermodynamic consistency and Galilean invariance are theoretically analyzed and numerically verified. Remarkably, the theoretical simplicity endues the model with the advantages of high efficiency and easy implementation. We also find that it can work well together with various equations of state in order to simulate different kinds of multiphase flows. Importantly, it has a tunable parameter κ, which can be used to reduce the effect of spurious current and adjust the surface tension to meet the requirements of researches.

Contact angle is an essential characteristic in wetting, capillarity and moving contact line; however, although contact angle phenomena are effectively simulated, an accurate and real-time measurement for contact angle has not been well studied in computational fluid dynamics, especially in dynamic environments. Here, we design a geometry-based mesoscopic scheme for on-the-spot measurement of the contact angle in the lattice Boltzmann method. The measuring results without gravity effect are in good agreement with the benchmarks from the spherical cap method. The performances of the scheme are further verified in gravitational environments by simulating sessile and pendent droplets on smooth solid surfaces and dynamic contact angle hysteresis on chemically heterogeneous surfaces. This scheme is simple and computationally efficient. It requires only the local data and is independent of multiphase models.

No abstract

This paper presents a lattice Boltzmann model to simulate the aqueous humor (AH) dynamics in the human eyes by involving incompressible Navier-Stokes flow, heat convection and diffusion, and Darcy seepage flow. Verifying simulations indicate that the model is stable, convergent and robust. Further investigations were carried out, including the effects of heat convection and buoyancy, AH production rate, permeability of trabecular meshwork, viscosity of AH and anterior chamber angle on intraocular pressure (IOP). The heat convection and diffusion can significantly affect the flow patterns in the healthy eye, and the IOP can be controlled by increasing the anterior chamber angle or decreasing the secretion rate, the drainage resistance and viscosity of AH. However, the IOP is insensitive to the viscosity of the AH, which may be one of the causes that the viscosity would not have been considered as a factor for controlling the IOP. It's interesting that all these factors have more significant influences on the IOP in pathologic eyes than healthy ones. The temperature difference and the eye-orientation have obvious influence on the cornea and iris wall shear stresses. The present model and simulation results are expected to provide an alternative tool and theoretical reference for the study of AH dynamics.