A heat conduction model with an arrow-shaped high thermal conductivity channel (ASHTCC) in a square heat generation body (SHGB) is established in this paper. By taking the minimum maximum temperature difference (MMTD) as the optimization goal, constructal designs of the ASHTCC are conducted based on single, two, and three degrees of freedom optimizations under the condition of fixed ASHTCC material. The outcomes illustrate that the heat conduction performance (HCP) of the SHGB is better when the structure of the ASHTCC tends to be flat. Increasing the thermal conductivity ratio and area fraction of the ASHTCC material can improve the HCP of the SHGB. In the discussed numerical examples, the MMTD obtained by three degrees of freedom optimization are reduced by 8.42% and 4.40%, respectively, compared with those obtained by single and two degrees of freedom optimizations. Therefore, three degrees of freedom optimization can further improve the HCP of the SHGB. Compared the HCPs of the SHGBs with ASHTCC and the T-shaped one, the MMTD of the former is reduced by 13.0%. Thus, the structure of the ASHTCC is proven to be superior to that of the T-shaped one. The optimization results gained in this paper have reference values for the optimal structure designs for the heat dissipations of various electronic devices.

The Chinese soft-shelled turtle Pelodiscus sinensis is a highly valued freshwater species cultured in China. A 122 d experiment was conducted to assess the effects of water spinach Ipomoea aquatica cultivation in floating beds on water quality, and growth performance and economic return of P. sinensis cultured in ponds. Two treatments, each in triplicate, with and without I. aquatica cultivation were designed. Results showed that the levels of total ammonia nitrogen (TAN), total nitrogen (TN), total phosphorus (TP), chlorophyll a (chl a) and turbidity in treatments with I. aquatica cultivation (IAC) were significantly (p < 0.05) lower than those in treatments without I. aquatica (control). Mean TN and TP concentrations in the IAC treatment were 27.9 and 42.5%, respectively, lower than in the control treatment at the end of the experiment. The presence of I. aquatica also has a positive effect on the performance of P. sinensis. Although no significant difference was found in specific growth rate (SGR) between the 2 treatments, mean survival rates, production and net income were significantly higher in the IAC treatment compared to the control (p < 0.05). These results suggest that I. aquatica cultivation in the pond system of turtles has a synergistic effect on overall economic return and is effective at improving turtle growth performance and water quality.

High temperatures have become a severe factor limiting growth and yield for tomatoes (Lycopersicon esculentum Mill.) due to unfavorable, above-optimum temperatures. Temperature and nitrogen application were the main regulatory factors in tomato plant cultivation. This research was undertaken to evaluate the effects of nitrogen application and high temperature on tomato morphology, dry matter accumulation and distribution, root vitality and nitrogen content of the above ground. Tomato variety “Jinfen No. 1” was planted and exposed to 4 day/night temperature levels (25 °C/15 °C as control CKT; 30 °C/20 °C, lightly high-temperature LHT; 35 °C/25 °C, moderate high-temperature MHT; 40 °C/30 °C, severe high temperature SHT) for 7 days after five nitrogen supply levels (N1–N5: 0, 1.3, 1.95, 2.6 and 3.75 g/plant, respectively; 2.6 g/plant is the recommended nitrogen-application rate, as control CKTN4). Within conditions, there was an extremely significant difference (p < 0.01) in all tomato plant parameters and an extremely significant interaction (p < 0.01) between high temperatures and nitrogen supply levels, except for plant height sampling on the 1st day in the recovery period. Dry matter accumulation decreased, and the accumulation rate slowed down. Dry matter accumulation under low nitrogen treatment was higher than in high nitrogen treatment. The proportion of dry matter in leaves decreased, the proportion of dry matter in stems increased and the difference in dry matter accumulation and proportion of dry matter between different nitrogen treatments decreased. Under LHT, the root activity of the tomato was increased under all nitrogen levels, while under MHT and SHT, high nitrogen and low nitrogen supply significantly inhibited root activity. Lightly high-temperature stress can increase root activity, and LHTN4 can increase by 5.15% compared with CKTN4. Appropriate nitrogen application can alleviate the damage caused by high-temperature stress on tomato plants and enhance the resistance of tomato plants, while excessive nitrogen application will aggravate the damage degree of tomato plants. In this study, the optimal nitrogen application rates under CKT-SHT treatment were 2.6, 2.6, 1.95 and 1.3 g/plant, respectively.

This study was conducted to investigate the effects of nitrogen application on growth, photosynthetic performance, nitrogen metabolism activities, and fruit quality of tomato plants under high-temperature (HT) stress. Three levels of daily minimum/daily maximum temperature were adopted during the flowering and fruiting stage, namely control (CK; 18°C/28°C), sub-high temperature (SHT; 25°C/35°C), and high-temperature (HT; 30°C/40°C) stress. The levels of nitrogen (urea, 46% N) were set as 0 (N1), 125 (N2), 187.5 (N3), 250 (N4), and 312.5 (N5) kg hm2, respectively, and the duration lasted for 5 days (short-term). HT stress inhibited the growth, yield, and fruit quality of tomato plants. Interestingly, short-term SHT stress improved growth and yield via higher photosynthetic efficiency and nitrogen metabolism whereas fruit quality was reduced. Appropriate nitrogen application can enhance the high-temperature stress tolerance of tomato plants. The maximum net photosynthetic rate (PNmax), stomatal conductance (gs), stomatal limit value (LS), water-use efficiency (WUE), nitrate reductase (NR), glutamine synthetase (GS), soluble protein, and free amino acids were the highest in N3, N3, and N2, respectively, for CK, SHT, and HT stress, whereas carbon dioxide concentration (Ci), was the lowest. In addition, maximum SPAD value, plant morphology, yield, Vitamin C, soluble sugar, lycopene, and soluble solids occurred at N3-N4, N3-N4, and N2-N3, respectively, for CK, SHT, and HT stress. Based on the principal component analysis and comprehensive evaluation, we found that the optimum nitrogen application for tomato growth, yield, and fruit quality was 230.23 kg hm2 (N3-N4), 230.02 kg hm2 (N3-N4), and 115.32 kg hm2 (N2), respectively, at CK, SHT, and HT stress. Results revealed that the high yield and good fruit quality of tomato plants at high temperatures can be maintained by higher photosynthesis, nitrogen efficiency, and nutrients with moderate nitrogen.