The tendency of miniaturizing semiconductor products towards nano-size transistor in integrated chips has motivated this work on the semiconductor package. Consequently, Four Fuzzy PID controller architectures based on type 2 FLC are developed; the Interval Type-2 Fuzzy Logic PID, IT2FLC PID MOALO-based, IT2FLC PI-PD, and IT2FLC PI-PD MOALO controllers. These architectures are improved to overcome the inherent nonlinearity in X-Y table models and capacitate the uncertainties of the parameters and the disturbances. Both controllers are designed to improve the desired position specification at minimum settling time (Ts), rise time (Tr), overshoot through minimization of oscillation and friction rejection during tracking the desired position trajectory. The ant lion optimization (ALO) algorithm has been efficiently solved optimization problems with minimum parameters and execution time. Hence, Multi-Objective Ant Lion Optimizer (MOALO) has been implemented to size the gains of the proposed controllers to get the desired position trajectory according to the required specification. A comparison with a related existing work shows minimal numerical values of improved transient specification response of Tr, Mp% and Ts for the MOALO-Based developed IT2 FLC PID and IT2 FLC PI-PD architectures. Observation of a higher Maximum Percentage of Enhancement settling time is noticed in both axes within the IT2FLC PI-PD architecture. Accordingly, transient performances of the four architectures have been significantly improved. The improvement is noticeable within the response of IT2FLC PI-PD architecture. The Maximum Percentage of Enhancement in the X-axis and Y-axis has been improved more than eight-fold and six-fold respectively using IT2FLC PI-PD architecture.

Abstract-One of the most debated issues nowadays is the quality of computer network service. The best internet service must provide a fast processing of the traffic. Each router has a queue of packets that provides a buffer space, where the packets wait for processing. Transmission Control Protocol (TCP) is a packets congestion control theory. Active Queue Management (AQM) is a mechanisms proposed to employ at gateways to improve the performance of TCP congestion control. AQM mechanisms aim to provide high link utilization with low loss rate and low queuing delay while reacting to load changes quickly. Random Early Detection (RED) is an extensively studied AQM algorithm that can detect congestion by dropping packets randomly with certain probability that serves as the function of the average queue size. In this work,

No abstract

Improving the dynamic performance of an automobile suspension system is considered as the main demand for comfortable and safe passenger travelling. From all previously proposed and implemented works, it is noticed that there are other factors that need to be considered to raising the car holding and stability in the road for improved passenger comfort when travelling. The minimization of car body displacement and oscillation time after exposure to road disturbances have been adopted in this work due to their contribution in raising the car holding and stability. The improvement in these features was maintained via a robust control methodology. The Fractional Order PID controller tuned by the Whales Optimization Algorithm (WOA) and Particle Swarm Optimization (PSO) algorithm is suggested in this work as a robust controller to reduce the effect of these demerits. In this paper, an active quarter car suspension nonlinear system is designed for the presented goals using a robust controller. Minimizing the displacement of the car body and reducing the damping frequency are achieved via a nonlinear control strategy using the fractional order PID controller, which can maintain the required characteristics. Tuning the parameters of the FOPID controller is performed by using the Whales Optimization Algorithm (WOA). Robustness of the FOPID controller is examined and proved to withstand a system parameter variation of ±12 % in all system parameters and a maximum of ±80 % in controller parameter variation. Simulation outcomes also indicate a considerably improved performance of the active suspension system with the fractional order PID controller over the traditional PID.

This paper involves the design and implementation of cell phone detection mobile robot. This is applicable in examination halls, private conferences and meeting rooms in which the using of cell phones is highly restricted. The robot is able to detect the presence of unauthorized communications by active phones and then distort them. The detection process is achieved by implementing an electrical circuit for sensing undesirable signals and using NodeMCU for interfacing the robot with a main computer unit. The main computer unit is used as a controlling platform in terms of mobile robot navigation as well as detection and jamming activating. This is accomplished by creating a graphical control panel programmed using a special HTML script. In this work, the cell phone detection mobile robot has been applied in an examination hall to simulate real educational environment. The robot has detected active calls by cell phones with a circle diameter of 1.2 meter and then jammed them directly. The whole area has been covered for detection and jamming by roaming the robot wirelessly via the remote main computer. Different voltage measurements for different detection distances have been recorded.