No abstract

Abstract"Although an automated flexible production cell is an intriguing prospect for small to median enterprises (SMEs) in current global market conditions, the complexity of programming remains one of the major hurdles preventing automation using industrial robots for SMEs. This paper provides a comprehensive review of the recent research progresses on the programming methods for industrial robots, including online programming, offline programming (OLP), and programming using Augmented Reality (AR). With the development of more powerful 3D CAD/PLM software, computer vision, sensor technology, etc. new programming methods suitable for SMEs are expected to grow in years to come. (C) 2011 Elsevier Ltd. All rights reserved." AbstractAlthough an automated flexible production cell is an intriguing prospect for small to median enterprises (SMEs) in current global market conditions, the complexity of programming remains one of the major hurdles preventing automation using industrial robots for SMEs. This paper provides a comprehensive review of the recent research progresses on the programming methods for industrial robots, including online programming, offline programming (OLP), and programming using Augmented Reality (AR). With the development of more powerful 3D CAD/PLM software, computer vision, sensor technology, etc, new programming methods suitable for SMEs are expected to grow in years to come.

Wire and arc additive manufacturing (WAAM) is a promising alternative to traditional subtractive manufacturing for fabricating large aerospace components that feature high buy-to-fly ratio. Since the WAAM process builds up a part with complex geometry through the deposition of weld beads on a layer-by-layer basis, it is important to model the geometry of a single weld bead as well as the multi-bead overlapping process in order to achieve high surface quality and dimensional accuracy of the fabricated parts. This study firstly builds models for a single weld bead through various curve fitting methods. The experimental results show that both parabola and cosine functions accurately represent the bead profile. The overlapping principle is then detailed to model the geometry of multiple beads overlapping together. The tangent overlapping model (TOM) is established and the concept of the critical centre distance for stable multi-bead overlapping processes is presented. The proposed TOM is shown to provide a much better approximation to the experimental measurements when compared with the traditional flat-top overlapping model (FOM). This is critical in process planning to achieve better geometry accuracy and material efficiency in additive manufacturing. Abstract: Wire and arc additive manufacturing (WAAM) is a promising alternative to traditional subtractive manufacturing for fabricating large aerospace components that feature high buy-to-fly ratio. Since the WAAM process builds up a part with complex geometry through the deposition of weld beads on a layer-by-layer basis, it is important to model the geometry of a single weld bead as well as the multi-bead overlapping process in order to achieve high surface quality and dimensional accuracy of the fabricated parts. This study firstly builds models for a single weld bead through various curve fitting methods. The experimental results show that both parabola and cosine functions accurately represent the bead profile. The overlapping principle is then detailed to model the geometry of multiple beads overlapping together. The Tangent Overlapping Model (TOM) is established and the concept of the critical centre distance for stable multi-bead overlapping processes is presented. The proposed TOM is shown to provide a much better approximation to the experimental measurements when compared with the traditional Flat-top Overlapping Model (FOM). This is critical in process planning to achieve better geometry accuracy and material efficiency in additive manufacturing.

This paper presents an algorithm to automatically generate optimal tool-paths for the wire and arc additive manufacturing (WAAM) process for a large class of geometries. The algorithm firstly decomposes 2D geometries into a set of convex polygons based on a divide-and-conquer strategy. Then, for each convex polygon, an optimal scan direction is identified and a continuous tool-path is generated using a combination of zigzag and contour pattern strategies. Finally, all individual sub-paths are connected to form a closed curve. This tool-path generation strategy fulfils the design requirements of WAAM, including simple implementation, a minimized number of starting-stopping points, and high surface accuracy. Compared with the existing hybrid method, the proposed path planning strategy shows better surface accuracy through experiments on a general 3D component.

No abstract

This paper presents a novel methodology to generate deposition paths for wire and arc additive manufacturing (WAAM). The medial axis transformation (MAT), which represents the skeleton of a given geometry, is firstly extracted to understand the geometry. Then a deposition path that is based on the MAT is efficiently generated. The resulting MAT-based path is able to entirely fill any given cross-sectional geometry without gaps. With the variation of step-over distance, material efficiency alters accordingly for both solid and thinwalled structures. It is found that thin-walled structures are more sensitive to step-over distance in terms of material efficiency. The optimal step-over distance corresponding to the maximum material efficiency can be achieved for various geometries, allowing the optimization of the deposition parameters. Five case studies of complex models including solid and thin-walled structures are used to test the developed methodology. Experimental comparison between the proposed MAT-based path patterns and the traditional contour path patterns demonstrate significant improved performance in terms of gap-free cross-sections. The proposed path planning strategy is shown to be particularly beneficial for WAAM of thin-walled structures. Abstract: This paper presents a novel methodology to generate deposition paths for wire and arc additive manufacturing (WAAM). The medial axis transformation (MAT), which represents the skeleton of a given geometry, is firstly extracted to understand the geometry. Then a deposition path that is based on the MAT is efficiently generated. The resulting MATbased path is able to entirely fill any given cross-sectional geometry without gaps. With the variation of step-over distance, material efficiency alters accordingly for both solid and thinwalled structures. It is found that thin-walled structures are more sensitive to step-over distance in terms of material efficiency. The optimal step-over distance corresponding to the maximum material efficiency can be achieved for various geometries, allowing the optimization of the deposition parameters. Five case studies of complex models including solid and thin-walled structures are used to test the developed methodology. Experimental comparison between the proposed MAT-based path patterns and the traditional contour path patterns demonstrate significant improved performance in terms of gap-free cross-sections. The proposed path planning strategy is shown to be particularly beneficial for WAAM of thin-walled structures.

No abstract

No abstract