No abstract

Contaminants of emerging concern (CECs) are often poorly removed from wastewater using conventional treatment technologies and there is limited understanding of their fate during treatment. Inappropriate sampling strategies lead to inaccuracies in estimating removals of CECs. In this study, we used the “fractionated approach” that accounts for the residence time distribution (RTD) in treatment units to investigate the fate of 26 target CECs in a municipal wastewater treatment plant (WWTP) that includes primary, secondary and tertiary treatment steps[...] Analysis of the selected metabolites demonstrated that negative removals obtained could be explained by transformations between the parent compound and their metabolites. This study contributes to the growing literature by applying the fractionated approach to calculate removal of different types of CECs across each wastewater treatment step. An additional level of understanding of the fate of CECs was provided by mass balance calculations in primary and secondary treatments

No abstract

The presence of micropollutants in the environment has triggered research on quantifying and predicting their fate in wastewater treatment plants (WWTPs). Since the removal of micropollutants is highly related to conventional pollutant removal and affected by hydraulics, aeration, biomass composition and solids concentration, the fate of these conventional pollutants and characteristics must be well predicted before tackling models to predict the fate of micropollutants. In light of this, the current paper presents the dynamic modelling of conventional pollutants undergoing activated sludge treatment using a limited set of additional daily composite data besides the routine data collected at a WWTP over one year. Results showed that as a basis for modelling, the removal of micropollutants, the Bürger–Diehl settler model was found to capture the actual effluent total suspended solids (TSS) concentrations more efficiently than the Takács model by explicitly modelling the overflow boundary. Results also demonstrated that particular attention must be given to characterizing incoming TSS to obtain a representative solids balance in the presence of a chemically enhanced primary treatment, which is key to predict the fate of micropollutants