Physical stability of synthetic skin samples during their exposure to microwave heating was investigated to demonstrate the use of the metal-assisted and microwave-accelerated decrystallization (MAMAD) technique for potential biomedical applications. In this regard, optical microscopy and temperature measurements were employed for the qualitative and quantitative assessment of damage to synthetic skin samples during 20 s intermittent microwave heating using a monomode microwave source (at 8 GHz, 2–20 W) up to 120 s. The extent of damage to synthetic skin samples, assessed by the change in the surface area of skin samples, was negligible for microwave power of ≤7 W and more extensive damage (>50%) to skin samples occurred when exposed to >7 W at initial temperature range of 20–39 °C. The initial temperature of synthetic skin samples significantly affected the extent of change in temperature of synthetic skin samples during their exposure to microwave heating. The proof of principle use of the MAMAD technique was demonstrated for the decrystallization of a model biological crystal (l-alanine) placed under synthetic skin samples in the presence of gold nanoparticles. Our results showed that the size (initial size ∼850 μm) of l-alanine crystals can be reduced up to 60% in 120 s without damage to synthetic skin samples using the MAMAD technique. Finite-difference time-domain-based simulations of the electric field distribution of an 8 GHz monomode microwave radiation showed that synthetic skin samples are predicted to absorb ∼92.2% of the microwave radiation.
Our laboratory has recently introduced and demonstrated the use of the metal-assisted and microwaveaccelerated evaporative crystallization (MA-MAEC) technique for rapid crystallization of biomolecules (e.g., amino acids, peptides and proteins). The MA-MAEC technique utilizes metal nanoparticles (silver, gold, copper, nickel, iron oxide, indium tin oxide), which are deposited on to iCrystal plates or glass surfaces to serve as selective nucleation sites and microwave-transparent medium to generate microwave-induced temperature gradients. In this highlight article, we will chronicle the effectiveness of the MA-MAEC technique as a rapid, efficient and easy to use technique for crystallization of biomolecules in potential applications in the pharmaceutical industry.
Gout is caused by the overproduction of uric acid and the inefficient metabolism of dietary purines in humans. Current treatments of gout, which include anti-inflammatory drugs, cyclooxygenase-2 inhibitors, and systemic glucocorticoids, have harmful side-effects. Our research laboratory has recently introduced an innovative approach for the decrystallization of biological and chemical crystals using the Metal-Assisted and Microwave-Accelerated Evaporative Decrystallization (MAMAD) technique. In the MAMAD technique, microwave energy is used to heat and activate gold nanoparticles that behave as “nano-bullets” to rapidly disrupt the crystal structure of biological crystals placed on planar surfaces. In this study, crystals of various sizes and compositions were studied as models for tophaceous gout at different stages (i.e., uric acid as small crystals (~10–100 μm) and L-alanine as medium (~300 μm) and large crystals (~4400 μm). Our results showed that the use of the MAMAD technique resulted in the reduction of the size and number of uric acid and L-alanine crystals up to >40% when exposed to intermittent microwave heating (up to 20 W power at 8 GHz) in the presence of 20 nm gold nanoparticles up to 120 s. This study demonstrates that the MAMAD technique can be potentially used as an alternative therapeutic method for the treatment of gout by effective decrystallization of large crystals, similar in size to those that often occur in gout.
Gout is a disease with elusive treatment options. Reduction of the size of l-alanine crystals as a model crystal for gouty tophi with the use of a monomode solid-state microwave was examined as a possible therapeutic aid. The effect of microwave heating on l-alanine crystals in the presence of gold nanoparticles (Au NPs) in solution and synovial fluid (SF) in a plastic pouch through a synthetic skin patch was investigated. In this regard, three experimental paradigms were employed: Paradigm 1 includes the effect of variable microwave power (5–10 W) and variable heating time (5–60 s) and Au NPs in water (20 nm size, volume of 10 μL) in a plastic pouch (1 × 2 cm2 in size). Paradigm 2 includes the effect of a variable volume of 20 nm Au NPs in a variable volume of SF up to 100 μL in a plastic pouch at a constant microwave power (10 W) for 30 s. Paradigm 3 includes the effect of constant microwave power (10 W) and microwave heating time (30 s), constant volume of Au NPs (100 μL), and variable size of Au NPs (20–200 nm) placed in a plastic pouch through a synthetic skin patch. In these experiments, an average of 60–100% reduction in the size of an l-alanine crystal (initial size = 450 μm) without damage to the synthetic skin or increasing the temperature of the samples beyond the physiological range was reported.
Physical stability of metal nanoparticle films on planar surfaces can be increased by employing surface modification techniques and/or type of metal nanoparticles. Subsequently, the enzymatic response of colorimetric bioassays can be increased for improved dynamic range for the detection of biomolecules. Using a model bioassay b-BSA, three planar platforms (1) poly (methyl methacrylate) (PMMA) with silver thin films (STFs) (2) silver nanowires (Ag NWs) on paper and (3) indium tin oxide (ITO) on polyethylene terephthalate (PET) were evaluated to investigate the extent of increase in the colorimetric signal. Bioassays for b-BSA and Ki-67 antigen (a real-life bioassay) in buffer were performed using microwave heating (total assay time is 25–30 min) and at room temperature (a control experiment, total assay time is 3 hours). Model bioassays showed that STFs were removed from the surface during washing steps and the extent of ITO remained unchanged. The lowest level of detection (LLOD) for b-BSA bioassays were: 10−10 M for 10 nm STFs on PMMA and Ag NWs on paper and 10−11 M for ITO. Bioassays for Ki-67 antigen yielded a LLOD of <10−9 M on ITO platforms, while STFs platforms were deemed unusable due to significant loss of STFs from the surfaces.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.