The Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) is a robotic arm-mounted instrument on NASA’s Perseverance rover. SHERLOC has two primary boresights. The Spectroscopy boresight generates spatially resolved chemical maps using fluorescence and Raman spectroscopy coupled to microscopic images (10.1 μm/pixel). The second boresight is a Wide Angle Topographic Sensor for Operations and eNgineering (WATSON); a copy of the Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) that obtains color images from microscopic scales (∼13 μm/pixel) to infinity. SHERLOC Spectroscopy focuses a 40 μs pulsed deep UV neon-copper laser (248.6 nm), to a ∼100 μm spot on a target at a working distance of ∼48 mm. Fluorescence emissions from organics, and Raman scattered photons from organics and minerals, are spectrally resolved with a single diffractive grating spectrograph with a spectral range of 250 to ∼370 nm. Because the fluorescence and Raman regions are naturally separated with deep UV excitation (<250 nm), the Raman region ∼ 800 – 4000 cm−1 (250 to 273 nm) and the fluorescence region (274 to ∼370 nm) are acquired simultaneously without time gating or additional mechanisms. SHERLOC science begins by using an Autofocus Context Imager (ACI) to obtain target focus and acquire 10.1 μm/pixel greyscale images. Chemical maps of organic and mineral signatures are acquired by the orchestration of an internal scanning mirror that moves the focused laser spot across discrete points on the target surface where spectra are captured on the spectrometer detector. ACI images and chemical maps (< 100 μm/mapping pixel) will enable the first Mars in situ view of the spatial distribution and interaction between organics, minerals, and chemicals important to the assessment of potential biogenicity (containing CHNOPS). Single robotic arm placement chemical maps can cover areas up to 7x7 mm in area and, with the < 10 min acquisition time per map, larger mosaics are possible with arm movements. This microscopic view of the organic geochemistry of a target at the Perseverance field site, when combined with the other instruments, such as Mastcam-Z, PIXL, and SuperCam, will enable unprecedented analysis of geological materials for both scientific research and determination of which samples to collect and cache for Mars sample return.
Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission’s Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 μrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 μrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover’s Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover’s traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover’s sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions.
The NASA Perseverance rover Mast Camera Zoom (Mastcam-Z) system is a pair of zoomable, focusable, multi-spectral, and color charge-coupled device (CCD) cameras mounted on top of a 1.7 m Remote Sensing Mast, along with associated electronics and two calibration targets. The cameras contain identical optical assemblies that can range in focal length from 26 mm ($25.5^{\circ }\, \times 19.1^{\circ }\ \mathrm{FOV}$ 25.5 ∘ × 19.1 ∘ FOV ) to 110 mm ($6.2^{\circ } \, \times 4.2^{\circ }\ \mathrm{FOV}$ 6.2 ∘ × 4.2 ∘ FOV ) and will acquire data at pixel scales of 148-540 μm at a range of 2 m and 7.4-27 cm at 1 km. The cameras are mounted on the rover’s mast with a stereo baseline of $24.3\pm 0.1$ 24.3 ± 0.1 cm and a toe-in angle of $1.17\pm 0.03^{\circ }$ 1.17 ± 0.03 ∘ (per camera). Each camera uses a Kodak KAI-2020 CCD with $1600\times 1200$ 1600 × 1200 active pixels and an 8 position filter wheel that contains an IR-cutoff filter for color imaging through the detectors’ Bayer-pattern filters, a neutral density (ND) solar filter for imaging the sun, and 6 narrow-band geology filters (16 total filters). An associated Digital Electronics Assembly provides command data interfaces to the rover, 11-to-8 bit companding, and JPEG compression capabilities. Herein, we describe pre-flight calibration of the Mastcam-Z instrument and characterize its radiometric and geometric behavior. Between April 26$^{th}$ t h and May 9$^{th}$ t h , 2019, ∼45,000 images were acquired during stand-alone calibration at Malin Space Science Systems (MSSS) in San Diego, CA. Additional data were acquired during Assembly Test and Launch Operations (ATLO) at the Jet Propulsion Laboratory and Kennedy Space Center. Results of the radiometric calibration validate a 5% absolute radiometric accuracy when using camera state parameters investigated during testing. When observing using camera state parameters not interrogated during calibration (e.g., non-canonical zoom positions), we conservatively estimate the absolute uncertainty to be $<10\%$ < 10 % . Image quality, measured via the amplitude of the Modulation Transfer Function (MTF) at Nyquist sampling (0.35 line pairs per pixel), shows $\mathrm{MTF}_{\mathit{Nyquist}}=0.26-0.50$ MTF Nyquist = 0.26 − 0.50 across all zoom, focus, and filter positions, exceeding the $>0.2$ > 0.2 design requirement. We discuss lessons learned from calibration and suggest tactical strategies that will optimize the quality of science data acquired during operation at Mars. While most results matched expectations, some surprises were discovered, such as a strong wavelength and temperature dependence on the radiometric coefficients and a scene-dependent dynamic component to the zero-exposure bias frames. Calibration results and derived accuracies were validated using a Geoboard target consisting of well-characterized geologic samples.
The Mastcam-Z Camera is a stereoscopic, multispectral camera with zoom capability on NASA’s Mars-2020 Perseverance rover. The Mastcam-Z relies on a set of two deck-mounted radiometric calibration targets to validate camera performance and to provide an instantaneous estimate of local irradiance and allow conversion of image data to units of reflectance (R∗ or I/F) on a tactical timescale. Here, we describe the heritage, design, and optical characterization of these targets and discuss their use during rover operations. The Mastcam-Z primary calibration target inherits features of camera calibration targets on the Mars Exploration Rovers, Phoenix and Mars Science Laboratory missions. This target will be regularly imaged during flight to accompany multispectral observations of the martian surface. The primary target consists of a gold-plated aluminum base, eight strong hollow-cylinder Sm2Co17 alloy permanent magnets mounted in the base, eight ceramic color and grayscale patches mounted over the magnets, four concentric, ceramic grayscale rings and a central aluminum shadow post (gnomon) painted with an IR-black paint. The magnets are expected to keep the central area of each patch relatively free of Martian aeolian dust. The Mastcam-Z secondary calibration target is a simple angled aluminum shelf carrying seven vertically mounted ceramic color and grayscale chips and seven identical, but horizontally mounted ceramic chips. The secondary target is intended to augment and validate the calibration-related information derived from the primary target. The Mastcam-Z radiometric calibration targets are critically important to achieving Mastcam-Z science objectives for spectroscopy and photometric properties.
The article was published prior to reference updating for two of the listed references. The just references are as follows:Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) is a robotic arm-mounted instrument onboard NASA’s Perseverance rover. SHERLOC combines imaging via two cameras with both Raman and fluorescence spectroscopy to investigate geological materials at the rover’s Jezero crater field site. SHERLOC requires in situ calibration to monitor the health and performance of the instrument. These calibration data are critically important to ensure the veracity of data interpretation, especially considering the extreme martian environmental conditions where the instrument operates. The SHERLOC Calibration Target (SCT) is located at the front of the rover and is exposed to the same atmospheric conditions as the instrument. The SCT includes 10 individual targets designed to meet all instrument calibration requirements. An additional calibration target is mounted inside the instrument’s dust cover. The targets include polymers, rock, synthetic material, and optical pattern targets. Their primary function is calibration of parameters within the SHERLOC instrument so that the data can be interpreted correctly. The SCT was also designed to take advantage of opportunities for supplemental science investigations and includes targets intended for public engagement. The exposure of materials to martian atmospheric conditions allows for opportunistic science on extravehicular suit (i.e., “spacesuit”) materials. These samples will be used in an extended study to produce direct measurements of the expected service lifetimes of these materials on the martian surface, thus helping NASA facilitate human exploration of the planet. Other targets include a martian meteorite and the first geocache target to reside on another planet, both of which increase the outreach and potential of the mission to foster interest in, and enthusiasm for, planetary exploration. During the first 200 sols (martian days) of operation on Mars, the SCT has been analyzed three times and has proven to be vital in the calibration of the instrument and in assisting the SHERLOC team with interpretation of in situ data.
Since the selection of the proposed Mars 2020 mission as a Rover with the capability of sample collection and caching, there has been renewed interest in subsequent mission concepts to return Mars samples to Earth. The general architecture for this series of missions is outlined in the Planetary Science Decadal Survey of 2011. The role of the Sample Return Orbiter (SRO) in The 2011 Decadal Survey MSR architecture was to collect an orbiting sample (OS) from low Mars orbit and deliver it to Earth's surface. The architecture focused on chemical propulsion orbiters with ballistic and aerobraking trajectories that were dedicated entirely to the capture of orbiting samples and returning them to the surface of the Earth. Recent concepts have explored the use of Solar Electric Propulsion (SEP) to Mars and for the return to Earth. SEP could enable significant mission flexibility which includes: lower launch mass or increased mass delivery capability to Mars orbit and return to Earth; longer launch periods for both launch and Earth return; consistency of design across launch opportunities; access to both high and low Mars orbitaltitudes; increased on-orbit ∆V budgets for orbit changes and sample rendezvous; and greater control over Earth arrival speed and geometry. With this flexibility come opportunities to: save launch cost; add functions such as remote sensing observations, secondary payload deployment, and relay telecommunications; and choose between direct return of Mars samples to the Earth's biosphere or capturing them to a stable long-term orbit around the Earth. This paper compares the previous SRO chemical-ballistic concepts with the recent SEP orbiter concepts. We will show the potential benefits gained by the inherent flexibility of SEP as applied to launch mass, launch periods, Earth return opportunities, on-orbit ∆V and other architectural drivers.
The concept of Mars Sample Return (MSR) has been considered since the 1960s and is still a top priority for the planetary science community.[1] Although a plan on the number and types of samples to be collected for MSR has been outlined, as articulated in the Mars 2020 Science Definition Team report [2], the trade space of options to return this sample from the surface of Mars to the surface of the Earth is still being explored. One of the main challenges with MSR is that it is inherently a multi-vehicle system where each vehicle's design impacts that of the others. Defining the trade space must therefore be treated as a System of Systems (SoS) problem. The work presented puts forward a framework to rapidly explore such spatially and temporally distributed systems. It investigates the possible vehicle and technology options for MSR, assuming that a packaged sample has been left on the surface of Mars. It also evaluates how launch sequencing choices affect the expected return on investment of different architectures. The paper explores eight key trades, including different types of landing and propulsion systems, as well as low-cost direct return options. A large set of architectures are compared to the baseline proposed in the Planetary Science Decadal Survey [1] for MSR, which consists of a stationary lander, a small fetch rover, a Mars Ascent Vehicle (MAV), and a return orbiter with chemical propulsion. Overall, the baseline is found to be well optimized, although a few options, including the use of solar electric propulsion and of a roving vehicle carrying the MAV to the sample, are shown to offer a better return on investment. Furthermore, when considering only the goals of MSR, an approach where the lander is sent to Mars at least one launch window ahead of the return orbiter is demonstrated to be preferable.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.