The viscosity of ionic liquids (ILs) has been modeled as a function of temperature and at atmospheric pressure using a new method based on the UNIFAC–VISCO method. This model extends the calculations previously reported by our group (see Zhao et al. J. Chem. Eng. Data 2016, 61, 2160–2169) which used 154 experimental viscosity data points of 25 ionic liquids for regression of a set of binary interaction parameters and ion Vogel–Fulcher–Tammann (VFT) parameters. Discrepancies in the experimental data of the same IL affect the quality of the correlation and thus the development of the predictive method. In this work, mathematical gnostics was used to analyze the experimental data from different sources and recommend one set of reliable data for each IL. These recommended data (totally 819 data points) for 70 ILs were correlated using this model to obtain an extended set of binary interaction parameters and ion VFT parameters, with a regression accuracy of 1.4%. In addition, 966 experimental viscosity data points for 11 binary mixtures of ILs were collected from literature to establish this model. All the binary data consist of 128 training data points used for the optimization of binary interaction parameters and 838 test data points used for the comparison of the pure evaluated values. The relative average absolute deviation (RAAD) for training and test is 2.9% and 3.9%, respectively.

ABSTRACT:A model for gas-particle partitioning of polycyclic aromatic hydrocarbons (PAHs) was evaluated using polyparameter linear free energy relationships (ppLFERs) following a multiphase aerosol scenario. The model differentiates between various organic (i.e., liquid water-soluble (WS)/organic soluble (OS) organic matter (OM), and solid/semisolid organic polymers) and inorganic phases of the particulate matter (PM). Dimethyl sulfoxide and polyurethane were assigned as surrogates to simulate absorption into the abovementioned organic phases, respectively, whereas soot, ammonium sulfate, and ammonium chloride simulated adsorption processes onto PM. The model was tested for gas and PM samples collected from urban and nonurban sites in Europe and the Mediterranean, and the output was compared with those calculated using single-parameter linear free energy relationship (spLFER) models, namely JungePankow, Finizio, and Dachs-Eisenreich. The ppLFER model on average predicted 96 ± 3% of the observed partitioning constants for semivolatile PAHs, fluoranthene, and pyrene, within 1 order of magnitude accuracy with root-mean-square errors (RMSE) of 0.35−0.59 across the sites. This was a substantial improvement compared to Finizio and Dachs-Eisenreich models (37 ± 17 and 46 ± 18% and RMSE of 1.03−1.40 and 0.94−1.36, respectively). The JungePankow model performed better among spLFERs but at the same time showed an overall tendency for overestimating the partitioning constants. The ppLFER model demonstrated the best overall performance without indicating a substantial intersite variability. The ppLFER analysis with the parametrization applied in this study suggests that the absorption into WSOSOM could dominate the overall partitioning process, while adsorption onto salts could be neglected.

No abstract

No abstract

No abstract