No abstract

No abstract

Sabin-IPV (or sIPV, inactivated polio vaccine based on attenuated Sabin strains) is anticipated to replace the oral polio vaccine for the endgame in polio eradication. Optimization of sIPV production will lead to a better economically feasible vaccine. To assist process optimization, we studied Sabin type 1 poliovirus (PV) infection kinetics on Vero cells in controlled bioreactor vessels. The aim of our study was to develop a descriptive mathematical model able to capture the dynamics of adherent Vero cell growth and PV infection kinetics in animal component free medium. The model predicts the cell density, metabolites profiles, and viral yields in time. We found that the multiplicity of infection (MOI) and the time of infection (TOI) within the investigated range did not affect maximal PV yields, but they did affect the process time. The latter may be reduced by selecting a low TOI and a high MOI. Additionally, we present a correlation between viral titers and D-antigen, a measure for immunogenicity, of Sabin type 1 PV. The developed model is adequate for further studies of the cell metabolism and infection kinetics and may be used to identify control strategies to increase viral productivity. Increased viral yields reduce costs of polio vaccines with large implications on public health.

Worldwide efforts to eradicate polio caused a tipping point in polio vaccination strategies. A switch from the oral polio vaccine, which can cause circulating and virulent vaccine derived polioviruses, to inactivated polio vaccines (IPV) is scheduled. Moreover, a manufacturing process, using attenuated virus strains instead of wild-type polioviruses, is demanded to enhance worldwide production of IPV, especially in low- and middle income countries. Therefore, development of an IPV from attenuated (Sabin) poliovirus strains (sIPV) was pursued. Starting from the current IPV production process based on wild type Salk strains, adaptations, such as lower virus cultivation temperature, were implemented. sIPV was produced at industrial scale followed by formulation of both plain and aluminium adjuvanted sIPV. The final products met the quality criteria, were immunogenic in rats, showed no toxicity in rabbits and could be released for testing in the clinic. Concluding, sIPV was developed to manufacturing scale. The technology can be transferred worldwide to support post polio-eradication biosafety goals.

HighlightsVero cells were grown in batch, semi-batch, perfusion and recirculation strategies.At high cell densities (to 5 × 106 cells mL−1) cells were infected with poliovirus.Increased cell densities allowed 3 fold increase in d-antigen yield.Cell specific d-antigen yields were lower at higher cell densities.The semi-batch cultivation strategy is most promising for optimization.

The anticipated increase in the demand for inactivated polio vaccines resulting from the success in the polio eradication program requires an increase in production capacity and cost price reduction of the current inactivated polio vaccine production processes. Improvement of existing production processes is necessary as the initial process development has been done decades ago. An up-to-date lab-scale version encompassing the legacy inactivated polio vaccine production process was set-up. This lab-scale version should be representative of the large scale, meaning a scale-down model, to allow experiments for process optimization that can be readily applied. Initially the separate unit operations were scaled-down at setpoint. Subsequently, the unit operations were applied successively in a comparative manner to large-scale manufacturing. This allows the assessment of the effects of changes in one unit operation to the consecutive units at small-scale. Challenges in translating large-scale operations to lab-scale are discussed, and the concessions that needed to be made are described. The current scale-down model for cell and virus culture (2.3-L) presents a feasible model with its production scale counterpart (750-L) when operated at setpoint. Also, the current scale-down models for the DSP unit operations clarification, concentration, size exclusion chromatography, ion exchange chromatography, and inactivation are in agreement with the manufacturing scale. The small-scale units can be used separately, as well as sequentially, to study variations and critical product quality attributes in the production process. Finally, it is shown that the scale-down unit operations can be used consecutively to prepare trivalent vaccine at lab-scale with comparable characteristics to the product produced at manufacturing scale.

Historical manufacturing data can potentially harbor a wealth of information for process optimization and enhancement of efficiency and robustness. To extract useful data multivariate data analysis (MVDA) using projection methods is often applied. In this contribution, the results obtained from applying MVDA on data from inactivated polio vaccine (IPV) production runs are described. Data from over 50 batches at two different production scales (700-L and 1,500-L) were available. The explorative analysis performed on single unit operations indicated consistent manufacturing. Known outliers (e.g., rejected batches) were identified using principal component analysis (PCA). The source of operational variation was pinpointed to variation of input such as media. Other relevant process parameters were in control and, using this manufacturing data, could not be correlated to product quality attributes. The gained knowledge of the IPV production process, not only from the MVDA, but also from digitalizing the available historical data, has proven to be useful for troubleshooting, understanding limitations of available data and seeing the opportunity for improvements.

No abstract