Mesoporous polyaniline-silica nanocomposites with a full interpenetrating structure for pseudocapacitors were synthesized via the vapor phase approach. The morphology and structure of the nanocomposites were deeply investigated by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, thermal gravimetric analysis and nitrogen adsorption-desorption tests. The results present that the mesoporous nanocomposites possess a uniform particle morphology and full interpenetrating structure, leading to a continuous conductive polyaniline network with a large specific surface area. The electrochemical performances of the nanocomposites were tested in a mixed solution of sulfuric acid and potassium iodide. With the merits of a large specific surface area and suitable pore size distribution, the nanocomposite showed a large specific capacitance (1702.68 farad (F)/g) due to its higher utilization of the active material. This amazing value is almost three-times larger than that of bulk polyaniline when the same mass of active material was used.
Cationic polymerization is an important branch of polymer chemistry. Traditional cationic polymerization must be carried out in anhydrous and low temperature environment, with harsh operating conditions, high operating costs and high energy consumption. Visible light induced cationic polymerization is simple, environmentally friendly, and low‐cost, so it has become a research hotspot of living cationic polymerization. This paper gives an overview of the recent advances (mainly from 2015 to 2023) on visible‐light‐induced cationic polymerization, with a focus on visible‐light‐initiated and visible‐light‐controlled cationic polymerization. On the basis of controlling cationic polymerization to achieve macromolecular reaction engineering, the realization of temporal scale control will be the main development direction in the future.
Cationic copolymerization of isobutylene and chlorostyrene was investigated using the Lewis acid initiator system. Titanium (IV) chloride (TiCl4) and ethylaluminum sesquichloride (AlEt1.5Cl1.5) were used as the co-initiators, and 2-chloro-2,4,4-trimethylpentane (TMPCl) and H2O were used as the main initiators. The influences of monomer feeding ratio and reaction time were studied. The reaction mechanism was proposed by studying the reaction kinetics. It was found that when p-chloromethylstyrene (p-ClMSt) was used, benzyl chloride was easily involved in the initiation reaction stage, leading to the formation of branched polymer. When p-chlorostyrene (p-ClSt) was used as a co-monomer, living copolymerization was achieved and no branching structure formed. Isobutylene, isoprene, and p-ClSt were synthesized with the AlEt1.5Cl1.5 initiator system. The high-molecular-weight halogenated ternary copolymer was successfully prepared by one-step polymerization. Vulcanization and mechanical property studies were also performed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.