Cesium lead halide perovskite quantum dots (QDs) have gained significant attention as next-generation optoelectronic materials; however, their properties are highly dependent on their surface chemistry. The surfaces of cuboidal CsPbBr3 QDs have been intensively studied by both theoretical and experimental techniques, but fundamental questions still remain about the atomic termination of the QDs. The binding sites and modes of ligands at the surface remain unproven. Herein, we demonstrate that solid-state NMR spectroscopy allows the unambiguous assignments of organic surface ligands via 1H, 13C, and 31P NMR. Surface-selective 133Cs solid-state NMR spectra show the presence of an additional 133Cs NMR signal with a unique chemical shift that is attributed to Cs atoms terminating the surface of the particle and which are likely coordinated by carboxylate ligands. Dipolar dephasing curves that report on the distance between the surface ammonium ligands and Cs and Pb were recorded using double resonance 1H{133Cs} and 1H{207Pb} RESPDOR experiments. Model QD surface slabs with different possible surface terminations were generated from the CsPbBr3 crystal structure and theoretical RESPDOR dipolar dephasing curves considering all possible 1H-133Cs/207Pb spin pairs were then calculated. Comparison of the calculated and experimental RESPDOR curves indicates the particles are CsBr terminated (not PbBr2 terminated), with alkylammonium ligands situated within surface Cs vacancies, consistent with the surface-selective 133Cs NMR experiments. These results highlight the utility of high-resolution solid-state NMR spectroscopy for studying ligand binding and the surface structure of nanomaterials.

Surface characterization is crucial for understanding how the atomic-level structure affects the chemical and photophysical properties of semiconducting nanoparticles (NPs). Solid-state nuclear magnetic resonance spectroscopy (NMR) is potentially a powerful technique for the characterization of the surface of NPs, but it is hindered by poor sensitivity. Dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS) has previously been demonstrated to enhance the sensitivity of surfaceselective solid-state NMR experiments by one to two orders of magnitude. Established sample preparations for DNP SENS experiments on NPs require the dilution of the NPs on mesoporous silica. Using hexagonal boron nitride (h-BN) to disperse the NPs doubles DNP enhancements and absolute sensitivity as compared to standard protocols with mesoporous silica. Alternatively, precipitating the NPs as powders, mixing them with h-BN, then impregnating the powdered mixture with radical solution leads to further four-fold sensitivity enhancements by increasing the concentration of NPs in the final sample. This modified procedure provides a factor 9 improvement in NMR sensitivity as compared to previously established DNP SENS procedures, enabling challenging homonuclear and heteronuclear 2D NMR experiments on CdS, Si and Cd3P2 NPs. These experiments allow NMR signals from the surface, subsurface and core sites to be observed and assigned. For example, we demonstrate that the acquisition of DNP-enhanced 2D 113Cd113Cd correlation NMR experiments on CdS NPs and natural isotropic abundance 2D 13C29Si HETCOR of functionalized Si NPs. These experiments provide a critical understanding of NP surface structures.

Since the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow sizeand composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity.In this Account, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr3. We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr3 nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr3 nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr3, which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.

J( 77 Se, 113 Cd), heteronuclear 77 Se{ 113 Cd} spin echo (J-resolved) NMR experiments were then used to determine the number of Cd atoms bonded to Se atoms and vice versa.The J-resolved experiments directly confirmed that major Cd and Se surface species have CdSe2O2 and SeCd4 stoichiometries, respectively. Considering the crystal structure of zinc blende CdSe, and the similarity of the solid-state NMR data for the platelets and spheroids, we conclude that the surface of the spheroidal CdSe NCs is primarily composed of {100} facets. The methods outlined here will generally be applicable to obtain detailed surface structures of various main group semiconductors.

Soft chemistry methods offer the possibility of synthesizing metastable and kinetic products that are unobtainable through thermodynamically-controlled, high-temperature reactions. A recent solution-phase exploration of Li-Zn-Sb phase space revealed a previously unknown cubic half-Heusler MgAgAs-type LiZnSb polytype. Interestingly, this new cubic phase was calculated to be the most thermodynamically stable, despite prior literature reporting only two other ternary phases (the hexagonal half-Heusler LiGaGe-type LiZnSb, and the full-Heusler Li2ZnSb). This surprising discovery, coupled with the intriguing optoelectronic and transport properties of many antimony containing Zintl phases, required a thorough exploration of syn-thetic parameters. Here, we systematically study the effects that different precursor concentrations, injection order, nucleation and growth temperatures, and reaction time have on the solution-phase synthesis of these materials. By doing so, we identify conditions that selectively yield several unique ternary (c-LiZnSb vs. h*-LiZnSb), binary (ZnSb vs. Zn8Sb7), and metallic (Zn, Sb) products. Further, we find one of the ternary phases adopts a variant of the previously observed hexagonal LiZnSb struc-ture. Our results demonstrate the utility of low temperature solution phase-soft synthesis-methods in accessing and mining a rich phase space. We anticipate that this work will motivate further exploration of multinary I-II-V compounds, as well as encourage similarly thorough investigations of related Zintl systems by solution phase methods. Disciplines Materials ChemistryComments "This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Chemistry of Materials, copyright © American Chemical Society after peer review. To access the final edited and published work see http://dx.doi.org/10.1021/acs.chemmater.8b02910. ABSTRACT: Soft chemistry methods offer the possibility of synthesizing metastable and kinetic products that are unobtainable through thermodynamically-controlled, high-temperature reactions. A recent solution-phase exploration of Li-Zn-Sb phase space revealed a previously unknown cubic half-Heusler MgAgAs-type LiZnSb polytype. Interestingly, this new cubic phase was calculated to be the most thermodynamically stable, despite prior literature reporting only two other ternary phases (the hexagonal half-Heusler LiGaGe-type LiZnSb, and the full-Heusler Li2ZnSb). This surprising discovery, coupled with the intriguing optoelectronic and transport properties of many antimony containing Zintl phases, required a thorough exploration of synthetic parameters. Here, we systematically study the effects that different precursor concentrations, injection order, nucleation and growth temperatures, and reaction time have on the solution-phase synthesis of these materials. By doing so, we identify conditions that selectively yield several unique ternary (c-LiZnSb vs. h*-LiZnSb), binary (ZnSb vs. Zn8Sb7), and metallic (Zn, Sb) products. Furt...

Intermetallic compounds are atomically ordered inorganic materials containing two or more transition metals and main-group elements in unique crystal structures. Intermetallics based on group 10 and group 14 metals have shown enhanced activity, selectivity, and durability in comparison to simple metals and alloys in many catalytic reactions. While high-temperature solid-state methods to prepare intermetallic compounds exist, softer synthetic methods can provide key advantages, such as enabling the preparation of metastable phases or of smaller particles with increased surface areas for catalysis. Here, we study a generalized family of heterobimetallic precursors to binary intermetallics, each containing a group 10 metal and a group 14 tetrel bonded together and supported by pincer-like pyridine-2-thiolate ligands. Upon thermal decomposition, these heterobimetallic complexes form 10-14 binary intermetallic nanocrystals. Experiments and density functional theory (DFT) computations help in better understanding the reactivity of these precursors toward the synthesis of specific intermetallic binary phases. Using Pd2Sn as an example, we demonstrate that nanoparticles made in this way can act as uniquely selective catalysts for the reduction of nitroarenes to azoxyarenes, which highlights the utility of the intermetallics made by our method. Employing heterobimetallic pincer complexes as precursors toward binary nanocrystals and other metal-rich intermetallics provides opportunities to explore the fundamental chemistry and applications of these materials.

No abstract

No abstract