No abstract

No abstract

No abstract

No abstract

No abstract

Accurately quantifying the aerodynamic forces acting on vehicles and long-span bridges is critical for assessing the safety of moving vehicles on bridges which are subjected to strong wind. It is necessary to consider the aerodynamic interference between vehicles and the bridge, especially for this with the bluff body section and wind barriers. However, very few investigations have been carried out to find aerodynamic coefficients of vehicles on a bridge with the bluff body section and considering the effect of wind barrier. This article therefore carried out wind tunnel tests to determine aerodynamic coefficients of container truck on a bridge with a π-cross section and wind barriers. The influence of vehicle position in different road lanes of the bridge deck and the aerodynamic interference between vehicles on the aerodynamic characteristics of the vehicle and the bridge are investigated. Different heights and ventilation ratios of wind barrier are taken into consideration to examine variations of aerodynamic coefficients with different wind barriers. Furthermore, the change mechanism in the aerodynamic coefficients of the vehicles is observed by analyzing the wind pressure distribution on the surface of the vehicles. The test results show that the different lane locations of the vehicle affect the aerodynamic coefficients significantly, as well as the aerodynamic interference between vehicles with transverse arrangement or longitudinal arrangement, especially for the side force coefficient. The existence of wind barrier reduces the side force coefficients of the vehicle remarkably. Such effects also vary with the ventilation ratio and height of wind barrier.

This paper investigates the effect of a wind barrier on the aerodynamic performance of a train–bridge system under crosswind using a numerical simulation method. The studied bridge is a long-span cable-stayed bridge with a flat steel box girder, located in Chongqing, China. The flow field around the train–bridge system with and without a wind barrier is numerically simulated. Wind barrier porosities varying from 10 to 60% are evaluated. The tricomponent coefficients of the train, bridge, and train–bridge system are obtained and investigated in detail. The effect of the wind barrier on the aerodynamics of the train–bridge system is revealed through the determination of the aerodynamic forces, pressure mapping, and flow visualization. The results show that a wind barrier successfully decreases the mean velocity above the girder and consequently decreases the drag force and moment on the train; however, the wind barrier also significantly increases the drag force on the girder. Therefore, installation of a wind barrier improves the running safety of the train but is detrimental to the wind resistance of the bridge. Additionally, the efficiency of the wind barrier depends on the porosity. A lower porosity improves the train safety but is more detrimental to the bridge safety. An optimal wind barrier porosity of 30% is obtained based on the aerodynamic forces of both the train and the bridge. Compared to a train–bridge system without a wind barrier, the drag force and moment on the train decrease by 66.1 and 62.9%, respectively; the drag force on the bridge girder increases to 0.86, and the drag force on the train–bridge system equals that without the wind barrier.

No abstract