No abstract

No abstract

The durability of a fiber-reinforced polymer (FRP) composite is dependent on the diffusion of water or corrosive media in them. In this paper, the finite element method (FEM) is adopted to investigate the effects of neighborhood filaments in cell model process, as well as the fiber volume fraction, fiber arrangements and fiber in contact on the moisture diffusion in FRPs. The diffusivity coefficient determined by the modified predicted theoretical model is larger than the FEM results. The filaments affect the moisture diffusion process significantly within the 1.2$1.4 times of the fiber radius, while the fiber arrangement plays a slight effect relatively. In addition, the tortuosity of the diffusion path owing to the fiber contact is found to play a dominant role on the moisture diffusion. The diffusivity coefficient of the water in the fiber-resin interphase zone is much smaller than that of the matrix, due to the effect of the existence of the carbon fibers. For the current CFRP system, the diffusivity of resin matrix is 1.12 3 10 27 mm 2 /s and the diffusivity coefficient of the water in the interphase is only 25% of that of the matrix. POLYM. COMPOS., 00:000-000,

This study focused on the durability of basalt fibers, glass fibers, basalt‐fiber‐reinforced polymer (BFRP) bars, and glass‐fiber‐reinforced polymer (GFRP) bars in an artificial seawater. The specimens were immersed in the artificial seawater at 20, 40, and 60°C; the specimen immersed in distilled water at a temperature of 60°C was also used as a reference. The tensile strength of the monofilament basalt fibers and glass fibers immersed in the seawater for 90 days at a temperature of 60°C decreases by 61% and 59% respectively, showing the most significant degradation; the brittleness of the fibers also increases due to the decomposition of their sizing agent. The chloride ions in the seawater are beneficial to enhancing the resistance of the composites to moisture absorption. In addition, the tensile strength retention of the fiber‐reinforced polymer (FRP) bars is higher than that of the fibers due to the protection by the epoxy resin. The mechanical properties of the FRP bars immersed in the seawater improve after removing their moisture. The mechanical performance of the BFRP bars is inferior to that of the GFRP bars due to their higher water absorption and weak bonding between the basalt fibers and the polymer matrix.