An experimental system for observing the drop vaporization and microexplosion characteristics of emulsified droplets in high-temperature environments was conducted to analyze the effects of environmental temperature, droplet size, and water content on droplet behavior. In addition, emulsified low-sulfur heavy fuel oil (HFO) with a 20 vol% water content and pure low-sulfur HFO were used as fuels for burning in an industrial boiler under normal operating conditions. The results showed that by using an emulsified HFO with a 20 vol% water content, the boiler efficiency can be improved by 2%, and that a reduction of 35 ppm in NO x emissions (corresponding to a NO x reduction rate of 18%) can be achieved. These advantages are due to the occurrence of a microexplosion during the combustion of the emulsified droplets. It was observed that when emulsified HFO with a 20 vol% water content was used, the fuel (HFO) consumption rate was 252 l/h. On the other hand, the fuel consumption rate was 271 l/h when pure low-sulfur HFO was used. Therefore, a reduction of 19 l/h in the fuel (HFO) consumption rate was achieved when using the water-in-oil emulsion, corresponding to fuel savings of 7%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.