Abstrak. Salah satu energi alternatif yang efektif dikembangkan sekarang ini untuk mengganti bahan bakar minyak yaitu hidrogen. Untuk mendapatkan gas hidrogen dapat dilakukan melalui proses elektrolisis air dengan memecahkan senyawa H2O menjadi gas HHO (Hidrogen Hidrogen Oksigen) dengan bantuan listrik arus searah (Direct Current) melalui media elektroda berupa plat stainless steel 304. Pada penelitian ini, akan diteliti hasil produksi gas HHO oleh generator HHO tipe basah dengan metode elektrolisa H2O menggunakan variasi ketebalan elektroda jenis stainless steel 304 yaitu 0,8 mm, 1 mm dan 1,2 mm dengan katalis NaHCO3 (Natrium Bikarbonat) pada larutan elektrolitnya. Karakteristik yang diketahui meliputi konsumsi daya listrik yang digunakan oleh generator, volume gas yg dihasilkan, laju produksi gas HHO yang dihasilkan dan efisiensi generator. Hasil penelitian dan pengujian generator HHO tipe basah ini didapatkan generator terbaik pada ketebalan elektroda 1 mm diperoleh data hasil pengujian dengan daya HHO yang digunakan sebesar 59,11 Watt, laju produksi gas HHO yang dihasilkan sebanyak 0,00054 kg/s dan efisiensi generator HHO sebesar 9,42 %. Study On The Electrode Thickness In HHO (Hidrogen Hidrogen Oksigen) Gas Production By Wet Type HHO Generator With Catalyst NaHCO3 (Natrium Bikarbonat)Abstract. One of the alternative energy that effective and currently being developed to replace fossil fuels is hydrogen. To obtain the hydrogen gas can be done through the process of electrolysis of water by breaking the compound H2O into HHO (Hydrogen Hydrogen Oxygen) gas by using an electric direct current through the medium of 304 stainless steel plate as an electrode. This research will be developing and observing HHO gas production process using HHO generator wet type (wet cell) through electrolysis H2O with thickness variation of electrode that used 0.8 mm, 1 mm and 1.2 mm of electrode 304 stainless steel plate with NaHCO3 (Nathrium Bicarbonat) catalyst in the electrolyte solution. Characteristics that will be observed including the consumption of electrical power used by the generators, produced gas volume, HHO gas production rate and generator efficiency. Results of research and HHO generator wet type (wet cell) testing have obtained the best generator at a thickness of 1 mm electrode, testing data obtained with the use of HHO power of 59.11 watts, the rate of production of HHO gas is 0.00054 kg/s and HHO generator efficiency by 9.42%.
Penelitian ini berangkat dari kondisi rendahnya hasil belajar siswa dalam pembelajaran tematik kelas V SD Negeri 1 Kopen Kecamatan Jatipurno dapat diketahui dari rata-rata nilai ulangan harian siswa. Pada kegiatan ulangan harian yang diadakan guru menunjukkan perolehan nilai rata-rata siswa kurang dari 73. Dari 24 siswa yang mengikuti ulangan harian yang dilakukan, hanya 37,5 % yang mendapatkan nilai di atas 73, sedangkan 62,5 % siswa mendapat nilai dibawah 73.. Salah satu model pembelajaran yang dapat diterapkan untuk siswa kelas V di SD Negeri 1 Kopen Kecamatan Jatipurno adalah model pembelajaran Learning Cycle terutama pada muatan Ilmu Pengetahuan Alam tema Ekosistem. Berdasarkan hasil penelitian tindakan kelas (PTK) pada tema ekosistem muatan IPA yang berlangsung selama 2 Siklus dan setiap Siklus dua kali pertemuan dengan alokasi waktu 2 X 35 menit, maka penulis dapat menyimpulkan: Bahwa penggunaan model pembelajaran Learning Cycle dapat meningkatkan hasil belajar peserta didik Kelas V SDN 1 Kopen semester 1 Kecamatan Jatipurno Kabupaten Wonogiri Tahun Pelajaran 2020/2021, ditunjukkan dengan hasil ketuntasan belajar peserta didik sebelum perbaikan hanya 9 peserta didik (37,5 %) sedangkan pada Siklus I naik sebanyak 11 peserta didik (45,8 %) dan pada Siklus II naik menjadi 22 peserta didik (91,7 %) telah memenuhi KKM yang ditentukan. Improving learning outcomes for fifth grade students through the learning cycle learning model. This research departs from the low condition of student learning outcomes in thematic learning in grade V SD Negeri 1 Kopen, Jatipurno District, it can be seen from the average score of students' daily tests. In the daily test activities held by the teacher, the average score of students was less than 73. Of the 24 students who took the daily test, only 37.5% got a score above 73, while 62.5% of the students scored below 73 .. One learning model that can be applied to fifth grade students at SD Negeri 1 Kopen, Jatipurno District is the Learning Cycle learning model, especially on the Natural Science content with the theme of Ecosystems. Based on the results of classroom action research (PTK) on the theme of the IPA content ecosystem which lasted for 2 cycles and each cycle had two meetings with a time allocation of 2 X 35 minutes, the authors concluded: That the use of the Learning Cycle learning model can improve the learning outcomes of Class V students at SDN 1 Kopen semester 1 Jatipurno District, Wonogiri Regency Academic Year 2020/2021, is shown by the results of learning completeness of students before improvement only 9 students (37.5%) while in Cycle I increased by 11 students (45.8%) and in Cycle II increased to 22 students (91.7%) had fulfilled the specified KKM.
Salah satu upaya untuk penanganan pasca panen produk holtikultura adalah penyimpanan produk dalam kondisi dingin dengan menggunakan mesin pendingin kompresi uap. Kebutuhan energi listrik untuk mesin pendingin kompresi uap ini cukap besar sehingga diperlukan upaya penghematan energi untuk mengurangi biaya energi pasca panen. Tujuan dari penelitian ini adalah merancang pembangkit listik tenaga surya yang sesuai untuk mensuplai energi listrik pada kotak pendingin (cool box). Hasil perancangan yang dilakukan didapatkan bahwa PLTS yang sesuai dengan tujuan tersebut adalah sistem yang dikombinasikan dengan PLN agar mampu menyuplai kebutuhan energi listrik secara kontinyu. PLTS dengan jaringan listrik dikendalikan oleh switch pengontrol yang kerjanya satu cara arah: ketika PLTS bekerja (on), maka suplai listik dari PLN akan terputus dan begitu sebalihya. Hasil pengujian yang telah dilakukan, sistem PLTS ini mampu mengurangi kebutuhan energi listrik dari PLN untuk lemari pendingin hingga mencapai 78,9% tanpa beban dan 77,9% dengan beban.
One of the obstacles in utilizing used cooking oil as a raw material for making biodiesel is the high FFA (Free Fatty Acid) content. An alternative way that can be used to reduce FFA levels is to use adsorbents to adsorb free fatty acids. This study aims to use bagasse as an adsorbent for activated charcoal to reduce the FFA content of used cooking oil in the process of making biodiesel. The process of reducing the FFA of used cooking oil was carried out by an adsorption process using activated bagasse charcoal with an increased temperature of 100 oC to accelerate the rate of adsorption and evaporation of water trapped in the used cooking oil while stirring at 500 rpm with a magnetic stirrer. The most optimal adsorbent mass for bagasse activated charcoal is to use a mass of 15% w/v used cooking oil, because it has the lowest average FFA value compared to other masses. The most optimal adsorption time for used cooking oil is at 60 minutes of adsorption because it has the lowest average FFA value compared to other adsorption times. FAME.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.