Electricity generation and emission characteristics during the poultry litter and natural gas co-combustion process has rarely been studied. In this study, a Stirling engine was successfully integrated into the existing lab-scale swirling fluidized bed combustion system in order to further investigate the poultry litter and natural gas co-combustion process. Electricity, gaseous emissions, particulate matter (PM), and fly ash composition were analyzed under various operating conditions. Results indicated that the electricity reached 905 W under a water flow rate of 13.1 L/min and an engine head temperature of 584 °C. It was found that excess air (EA) ratios between 0.79 and 1.08 can relatively produce more electricity with lower emissions. At a secondary air (SA) height of 850 mm, secondary air/total air (SA/TA) ratios between 0.22 and 0.44 may significantly reduce NOx and CO emissions. By increasing the mixing ratio (MR), SO2 was reduced while NOx increased at the beginning of co-combustion process but then decreased again. Additionally, PM results were lower than Maryland emissions standards. The fly ash results showed a higher nutrient content (close to 16%). This study shows the possibility of using poultry litter as a sustainable energy source for energy production while emitting lower emissions in the small decentralized combustion system
The prediction and pre-evaluation of the thermal properties and combustion-related problems (e.g., emissions and ash-related problems) are critical to reducing emissions and improving combustion efficiency during the agricultural crop residues combustion process. This study integrated the higher heating value (HHV) model, specific heat model, and fuel indices as a new systematic approach to characterize the agricultural crop residues. Sixteen linear and non-linear regression models were developed from three main compositions of the ultimate analysis (e.g., C, H, and O) to predict the HHV of the agricultural crop residues. Newly developed HHV models have been validated with lower estimation errors and a higher degree of accuracy than the existing models. The specific heat of flue gas during the combustion process was estimated from the concentrations of C, H, O, S, and ash content under various excess air (EA) ratios and flue gas temperatures. The specific heat of agricultural crop residues was between 1.033 to 1.327 kJ/kg·K, while it was increased by decreasing the EA ratios and elevating the temperature of the flue gas. Combustion-related problems, namely corrosions, PM1.0 emissions, SOx, HCl, and ash-related problems were predicted using the fuel indices along with S and Cl concentrations, and ash compositions. Results showed that agricultural crop residues pose a severe corrosion risk and lower ash sintering temperature. This integrated approach can be applied to a wide range of biomass before the actual combustion process which may predict thermal-chemical properties and reduce the potential combustion-related emissions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.