Rod-shaped AgInTe2 nanocrystals (NCs) exhibiting intense near-band edge photoluminescence in the near-infrared (NIR) wavelength region, were successfully prepared by the thermal reaction of metal acetates and Te precursors in 1-dodecanethiol. Increasing the reaction temperature resulted in the formation of larger AgInTe2 NCs with crystal structures varying from hexagonal to tetragonal at reaction temperatures of 280 °C or higher. The energy gap was increased from 1.13 to 1.20 eV with a decrease in rod width from 8.3 to 5.6 nm, accompanied by a blue shift in the photoluminescence (PL) peak wavelength from 1097 to 1033 nm. The optimal PL quantum yield was approximately 18% for AgInTe2 NCs with rod widths of 5.6 nm. The applicability of AgInTe2 NCs as a NIR-emitting material for in vivo biological imaging was examined by injecting AgInTe2 NC-incorporated liposomes into the back of a C57BL/6 mouse, followed by in vivo photoluminescence imaging in the NIR region.

The bandedge PL peak wavelength of ZnTe–AgInTe2 solid solution nanocrystals was tunable in the near-IR region by changing their chemical composition.

Near-infrared (NIR)-light-emitting semiconductor nanocrystals (NCs) are regarded as promising biological markers for in vivo imaging due to their chemical stability and tunable emission properties depending on their size. To date, several high-quality NIR-emitting binary semiconductor NCs, such as CdTe, PbS and PbSe, have been developed, but they often contained highly toxic heavy metals such as Cd or Pb, limiting the range of their usage. Recently, we have successfully prepared highly luminescent and low toxic Ag-III-VI2-based multinary semiconductor NCs of ZnS-AgInS2 solid solution by using colloidal synthetic method, where these NCs have tunable photoluminescence (PL) (maximum quantum yield of 80 %) in visible light wavelength region.[1,2]    Since an Ag-III-VI2 semiconductor of AgInTe2 was reported to have a bulk band gap of approximately 1.0 eV, size-controlled AgInTe2 NCs show promise as NIR-light-emitting markers. However, with the exception of the recent preparation of spherical, approximately 11-nm AgInTe2 NCs,[3] no attempts have been made to fabricate highly photoluminescent AgInTe2 NCs with sizes less than several tens of nanometers. Here, we report rod-shaped AgInTe2 NCs with controlled widths. The obtained NCs exhibit intense PL and the peak wavelength in the NIR region is tunable by changing the rod width.    AgInTe2 NCs were synthesized by a thermal reaction of silver and indium acetates and trioctylphosphine telluride in 1-dodecanethiol at 180-300°C for 10 min under N2 atmosphere. Thus-obtained NCs were isolated by the addition of ethanol and then dissolved in octane to measure their optical properties.    In XRD patterns, the NCs prepared at higher than 280°C exhibited three broad peaks corresponding to tetragonal AgInTe2. On the other hand, different diffraction patterns were observed for particles prepared at less than 250°C, which was not consistent with any patterns reported for AgInTe2 or other conceivable crystal phases such as AgIn8Te5, Ag2Te, and In2Te3. We simulated the diffraction patterns of hexagonal crystal structure for bulk AgInTe2 which was in good agreement with XRD pattern of NCs obtained at 180°C. To the best of our knowledge, this is the first report of the formation of hexagonal AgInTe2 including bulk materials. TEM observations revealed that rod-shaped NCs were formed regardless of reaction temperature. The average width of the NCs increased monotonically from 5.5 to 8.3 nm with increasing reaction temperature from 180°C to 300°C, accompanied by an increase in the average length from 11.4 to 13.5 nm.    The solutions containing AgInTe2 NCs were deep-black in color due to strong light absorption in the visible and NIR wavelength regions. The NCs exhibited near-band-edge PL peak located near the corresponding absorption onset, and the peak wavelength was red-shifted with increasing reaction temperature as shown in Figure 1. The PL QY was enhanced with a decrease in the width of the rod-shaped AgInTe2 NCs, in which the maximum PL QY of 18% was obtained for the hexagonal phase AgInTe2 NCs prepared at 180°C. Although this value was approximately half of the PL QYs observed for conventional NIR-emissive semiconductor nanocrystals of PbS or PbSe, it was comparable to that of indocyanine green, which has practical uses as a dye for biological imaging. Hence, the relatively intense NIR emission of the AgInTe2 NCs demonstrates their potential use as an NIR marker for biological imaging. Reference [1] T. Torimoto, et al., J. Am. Chem. Soc., 2007, 129, 12388. [2] T. Kameyama, T. Torimoto, et al., J. Phys. Chem. C, 2015, 119, 24740. [3] M. Langevin et al., Nanoscale Res. Lett., 2015, 10, 255. Figure 1

No abstract