Many biological organisms can tune their mechanical properties to adapt to environments in multistable modes, but the current synthetic materials, with bistable states, have a limited ability to alter mechanical stiffness. Here, we constructed programmable organohydrogels with multistable mechanical states by an on-demand modular assembly of noneutectic phase transition components inside microrganogel inclusions. The resultant multiphase organohydrogel exhibits precisely controllable thermo-induced stepwise switching (i.e., triple, quadruple, and quintuple switching) mechanics and a self-healing property. The organohydrogel was introduced into the design of soft-matter machines, yielding a soft gripper with adaptive grasping through stiffness matching with various objects under pneumatic-thermal hybrid actuation. Meanwhile, a programmable adhesion of octopus-inspired robotic tentacles on a wide range of surface morphologies was realized. These results demonstrated the applicability of these organohydrogels in lifelike soft robotics in unconstructed and human body environments.

No abstract

Conventional rigid electronic systems use a number of metallization layers to route all necessary connections to and from isolated surface mount devices using well-established printed circuit board technology. In contrast, present solutions to prepare stretchable electronic systems are typically confined to a single stretchable metallization layer. Crossovers and vertical interconnect accesses remain challenging; consequently, no reliable stretchable printed circuit board (SPCB) method has established. This article reports an industry compatible SPCB manufacturing method that enables multilayer crossovers and vertical interconnect accesses to interconnect isolated devices within an elastomeric matrix. As a demonstration, a stretchable (260%) active matrix with integrated electronic and optoelectronic surface mount devices is shown that can deform reversibly into various 3D shapes including hemispherical, conical or pyramid.

Collecting in shallow water (water depth: ~30 m) is an emerging field that requires robotics for replacing human divers. Soft robots have several promising features (e.g., safe interaction with the environments, lightweight, etc.) for performing such tasks. In this article, we developed an underwater robotic system with a three-degree-of-freedom (3-DoF) soft manipulator for spatial delicate grasping in shallow water. First, we present the design and fabrication of the soft manipulator with an opposite-bending-and-stretching structure (OBSS). Then, we proposed a simple and efficient kinematics method for controlling the spatial location and trajectory of the soft manipulator’s end effector. The inverse kinematics of the OBSS manipulator can be solved efficiently (computation time: 8.2 ms). According to this inverse kinematics method, we demonstrated that the OBSS soft manipulator could track complex two-dimensional and three-dimensional trajectories, including star, helix, etc. Further, we performed real-time closed-loop pick-and-place experiments of the manipulator with binocular and on-hand cameras in a lab aquarium. Hydrodynamic experiments showed that the OBSS soft manipulator produced little force (less than 0.459 N) and torque (less than 0.228 N·m), which suggested its low-inertia feature during the underwater operation. Finally, we demonstrated that the underwater robotic system with the OBSS soft manipulator successfully collected seafood animals at the bottom of the natural oceanic environment. The robot successfully collected eight sea echini and one sea cucumber within 20 minutes at a water depth of around 10 m.

This paper presents a soft actuator embedded with two types of eutectic alloys which enable sensing, tunable mechanical degrees of freedom (DOF), and variable stiffness properties. To modulate the stiffness of the actuator, we embedded a low melting point alloy (LMPA) in the bottom portion of the soft actuator. Different sections of the LMPA could be selectively melted by the Ni-Cr wires twined underneath. To acquire the curvature information, EGaIn (eutectic gallium indium) was infused into a microchannel surrounding the chambers of the soft actuator. Systematic experiments were performed to characterize the stiffness, tunable DOF, and sensing the bending curvature. We found that the average bending force and elasticity modulus could be increased about 35 and 4000 times, respectively, with the LMPA in a solid state. The entire LMPA could be melted from a solid to a liquid state within 12 s. In particular, up to six different motion patterns could be achieved under each pneumatic pressure of the soft actuator. Furthermore, the kinematics of the actuator under different motion patterns could be obtained by a mathematical model whose input was provided by the EGaIn sensor. For demonstration purposes, a two-fingered gripper was fabricated to grasp various objects by adjusting the DOF and mechanical stiffness.