A microstrip bandpass filter using steppedimpedance resonators is designed in low-temperature co-fired ceramic technology for dual-band applications at 2.4 and 5.2 GHz. New coupling schemes are proposed to replace the normal counterparts. It is found that the new coupling scheme for the interstages can enhance the layout compactness of the bandpass filter; while the new coupling scheme at the input and output can improve the performance of the bandpass filter. To validate the design and analysis, a prototype of the bandpass filter was fabricated and measured. It is shown that the measured and simulated performances are in good agreement. The prototype of the bandpass filter achieved insertion loss of 1.25 and 1.87 dB, 11 of 29 and 40 dB, and bandwidth of 21% and 12.7% at 2.4 and 5.2 GHz, respectively. The bandpass filter is further studied for a single-package solution of dual-band radio transceivers. The bandpass filter is, therefore, integrated into a ceramic ball grid array package. The integration is analyzed with an emphasis on the connection of the bandpass filter to the antenna and to the transceiver die.
Design and experiment is given of differentially-driven microstrip antennas. First, the design formulas to determine the patch dimensions and the location of the feed point for single-ended microstrip antennas are examined to design differentially-driven microstrip antennas. It is found that the patch length can still be designed using the formulas for the required resonant frequency but the patch width calculated by the formula usually needs to be widen to ensure the excitation of the fundamental mode using the probe feeds. The condition that links the patch width, the locations of the probe feeds, and the excitation of the fundamental mode is given. Second, the wideband techniques for single-ended microstrip antennas are evaluated for differentially-driven microstrip antennas. A novel H-slot is proposed for differentially-driven microstrip antennas to improve impedance bandwidth. Third, the effects of imperfect differential signal conditions on the performance of differentially-driven microstrip antennas are investigated for the first time. It is found that they only degrade the polarization purity in the H-plane with an increased radiation of cross-polarization. Finally, both differentially-driven and single-ended microstrip antennas were fabricated and measured. It is shown that the simulated and measured results are in acceptable agreement. More importantly, it is also shown that the differentially-driven microstrip antenna has wider impedance bandwidth of measured 4.1% and simulated 3.9% and higher gain of measured 4.2 dBi and simulated 3.7 dBi as compared with those of measured 1.9% and simulated 1.3% and gain of measured 1.2 dBi and simulated 1.2 dBi of the single-ended microstrip antenna.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.