No abstract

No abstract

No abstract

In this study, electrical, thermal and mechanical properties of multi-walled carbon nanotubes (CNTs) reinforced Epon 862 epoxy have been evaluated. Firstly, 0.1, 0.2, 0.3, and 0.4 wt% CNT were infused into epoxy through a high intensity ultrasonic liquid processor and then mixed with EpiCure curing agent W using a high speed mechanical agitator. Electric conductivity, dynamic mechanical analysis (DMA), three point bending tests and fracture tests were then performed on unfilled, CNT-filled epoxy to identify the loading effect on the properties of materials. Experimental results show significant improvement in electric conductivity. The resistivity of epoxy decreased from 1014 Ω•m of neat epoxy to 10 Ω•m with 0.4% CNT. The experimental results also indicate that the frequency dependent behavior of CNT/epoxy nanocomposite can be modeled by R-C circuit, permittivity of material increase with increasing of CNT content. DMA studies revealed that filling the carbon nanotube into epoxy can produce a 90% enhancement in storage modulus and a 17°C increase in Tg. Mechanical test results showed that modulus increased with higher CNT loading percentages, but the 0.3 wt% CNT-infusion system showed the maximum strength and fracture toughness enhancement. The decrease in strength and fracture toughness in 0.4% CNT/epoxy was attributed to poor dispersions of nanotubes in the composite

In the hydrogen evolution reaction (HER), the reactivity as a function of the hydrogen adsorption energy on different metal substrates follows a well-known volcano curve, peaked at the precious metal Pt. The goal of turning nonprecious metals into efficient catalysts for HER and other important chemical reactions is a fundamental challenge; it is also of technological significance. Here, we present results toward achieving this goal by exploiting the synergistic power of marginal catalysis and confined catalysis. Using density functional theory calculations, we first show that the volcano curve stays qualitatively intact when van der Waals attractions between a hydrogen adatom and different metal (111) surfaces are included. We further show that the hydrogen adsorption energy on the metal surfaces is weakened by 0.12-0.23 eV when hydrogen is confined between graphene and the metal surfaces, with Ni exhibiting the largest change. In particular, we find that the graphene-modified volcano curve peaks around Ni, whose bare surface already possesses moderate (or marginal) reactivity, and the corresponding HER rate of graphene-covered Ni is comparable to that of bare Pt. A hydrogen adatom has high mobility within the confined geometry. These findings demonstrate that graphene-covered Ni is an appealing effective, stable, and economical catalytic platform for HER.

Superconductivity is a fascinating quantum phenomenon characterized by zero electrical resistance and the Meissner effect. To date, several distinct families of superconductors (SCs) have been discovered. These include three-dimensional (3D) bulk SCs in both inorganic and organic materials as well as two-dimensional (2D) thin film SCs but only in inorganic materials. Here we predict superconductivity in 2D and 3D organic metal-organic frameworks by using first-principles calculations. We show that the highly conductive and recently synthesized Cu-benzenehexathial (BHT) is a Bardeen-Cooper-Schrieffer SC. Remarkably, the monolayer Cu-BHT has a critical temperature (T) of 4.43 K, while T of bulk Cu-BHT is 1.58 K. Different from the enhanced T in 2D inorganic SCs which is induced by interfacial effects, the T enhancement in this 2D organic SC is revealed to be the out-of-plane soft-mode vibrations, analogous to surface mode enhancement originally proposed by Ginzburg. Our findings not only shed new light on better understanding 2D superconductivity but also open a new direction to search for SCs by interface engineering with organic materials.

No abstract

No abstract