The anisotropy and nonuniformity of wood-plastic composites (WPCs) affect the milling tool, which rapidly wears during high-speed milling of WPCs. Thus, the evolution mechanism of tool failure becomes complicated, and the prediction of tool wear cannot be precisely described mathematically. A neural network based on tool wear test was proposed to predict the tool wear condition during high-speed milling of WPCs. The traditional backpropagation (BP) neural network easily falls into the local optimal solution. A genetic algorithm (GA-BP) neural network prediction model was established by using the GA to optimise its initial weight and threshold. The BP model and the GA-BP model were evaluated in terms of mean square error and training times, and the generalisation verification was applied to the prediction model. After analysing and comparing the results of the two models, the GA-BP neural network model has better training speed and accuracy under the test conditions. The relative error between the predicted value and the actual value is controlled within 5%.
A high-speed milling experiment on wood-plastic composites was performed using cemented carbide tools, and the resulting wear pattern was studied. The influence of the cutting parameters, the cutting speed, feed speed, and axial cutting depth on the tool wear was studied via response surface methodology, and the influence of the interaction of the cutting parameters on tool wear was analyzed. Three-dimensional surface graphs and contour plots of the tool wear results were established. According to the experimental results, a mathematical model of the tool wear based on the second-order response surface methodology was established, and the model was utilized to verify its feasibility. The results show that the nose width (NW) increases with the increase of the cutting speed and axial cutting depth and decreases with the increase of feed speed. Among the factors affecting tool wear, the cutting speed had the greatest influence, followed by the feed rate, with the axial cutting depth affecting tool wear the least. According to the results of the interaction between the tool wear and the cutting parameters, a low feed speed and small axial cutting depth can be selected to ensure long tool life; for low-speed cutting, a high feed speed and large axial cutting depth can be adopted to ensure tool life while improving machining efficiency.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.