No abstract

No abstract

Repairing and regenerating injured neural tissue remains a worldwide challenge. Tissue engineering (TE) has been highlighted as a potential solution to provide functional substitutes for damaged organs or tissue. Among the biocompatible and biodegradable materials, poly-L-lactic-acid (PLLA) has been widely investigated in the TE field because of its tunable mechanical properties and tailorable surface functionalization. PLLA-based biomaterials can be engineered as scaffolds that mimic neural tissue extracellular matrix and modulate inflammatory responses. With technological advances, PLLA-based scaffolds can also have well-controlled three-dimensional sizes and structures to facilitate neurite extension. Furthermore, PLLA-based scaffolds have the potential to be used as drug-delivery carriers with controlled release. Moreover, owing to the good piezoelectric properties and capacity to carry conductive polymers, PLLA-based scaffolds can be combined with electrical stimulation to maintain stemness and promote axonal guidance. This mini-review summarizes and discusses the fabrication and modification techniques utilized in the PLLA-based biomaterial scaffolds for neural TE. Recent applications in peripheral nerve and spinal cord regeneration are also presented, and it is hoped that this will guide the future development of more effective and multifunctional PLLA-based nerve scaffolds.

No abstract

No abstract

No abstract

Study Design. Finite element analysis. Objective. To determine and compare the biomechanical stability of the bicortical short C2 pars screw fixation for highriding vertebral artery (HRVA) with the C2 pedicle screw and C2 translaminar screw fixation in finite element models. Summary of Background Data. Fixation of C2 is technically demanding in the case of HRVA. However, there is no consensus on the alternative technique for the C2 screw fixation for HRVA in the literature. Methods. A finite element model of the upper cervical spine (C0-C2) with HRVA had been developed. C1 pedicle screw was applied at C1 by using notching technique. Bicortical short C2 pars screws, C2 pedicle screws, and C2 translaminar screws were used in each model. Then a vertical load of 50 N and a 1.5 Nm torque were applied to the C0 to simulate flexion, extension, lateral bending, and axial rotation respectively. Results. Compared with C2 pedicle screw fixation, the bicortical short C2 pars screw fixation increased the range of motion by À1.45%, 2.13%, 62.0%, and 22.0% under flexion, extension, lateral bending, and axial rotation, respectively. However, the C2 translaminar screw fixation increased the range of motion by 43.6%, 17.8%, 423.4%, and 19.9%, respectively. In terms of the peak von Mises stress, compared with C2 pedicle screw fixation, bicortical short C2 pars screw decreased 46.1%, 41.6%, 71.3%, and À12.5% under flexion, extension, lateral bending, and axial rotation, respectively; C2 translaminar screw decreased À2.66%, À4.87%, 73.0%, and À10.1%, respectively. Conclusion. For a patient with HRVA, bicortical short C2 pars screw fixation provides sufficient stability and exhibited a smaller von Mises distribution on the screw-rod construct, indicating it could be an effective C2 internal fixation method for HRVA to promote C1-C2 stability and avoid the vertebral artery injury.

No abstract