The effective focal lengths of thermal lens in diode-end-pumped continuous-wave Nd:YVO(4) lasers for the (4)F(3/2)-->(4)I(11/2) and (4)F(3/2)-->(4)I(13/2) transitions were determined. The experimental results revealed that the thermal lensing effect for the (4)F(3/2)-->(4)I(11/2) transition can be sufficiently improved by employing a single-end diffusion-bonded Nd:YVO(4) crystal replacing a conventional Nd:YVO(4) crystal. However, using a double-end diffusion-bonded Nd:YVO(4) crystal was a great improvement over a single-end diffusion-bonded Nd:YVO(4) crystal for the (4)F(3/2)-->(4)I(13/2) transition with stronger thermal lensing effect.
A comparison between the fluorescence spectra of the Nd-doped vanadate crystals (Nd:YVO4, Nd:GdVO4, Nd:LuVO4) for the 4F3/2 → 4I11/2 transition is studied. We numerically analyze the condition of gain-to-loss balance via an uncoated intracavity etalon to achieve the dual-wavelength operation. We further experimentally demonstrate the orthogonally polarized dual-wavelength laser with a single Nd:LuVO4 crystal. The simultaneous dual-wavelength Nd:LuVO4 laser at 1085.7 nm in σ polarization and 1088.5 nm in π polarization is realized. At an incident pump power of 12 W, the average output power obtained at 1085.7 nm and 1088.5 nm is 0.4 W and 1.7 W, respectively.
A diode-pumped actively Q-switched mixed Nd:Y(0.3)Gd(0.7)VO(4) laser with an intracavity KTP crystal is developed to produce cascade SRS emission up to the fourth order. With an incident pump power of 14 W and a repetition rate of 50 kHz, the average output powers at the first, second, third and fourth Stokes modes are approximately 0.05 W, 0.61 W, 0.25 W, and 0.11 W, respectively. The maximum peak power is greater than 2 kW.
Articles you may be interested inEffects of germanium and nitrogen incorporation on crystallization of N-doped Ge2+xSb2Te5 (x = 0,1) thin films for phase-change memory Phase-change behaviors of Ge 2 Sb 2 Te 5 ͑GST͒ thin films doped with molybdenum ͑Mo͒ or nitrogen ͑N͒ were investigated by utilizing in situ electrical property measurement, x-ray diffraction ͑XRD͒, transmission electron microscopy ͑TEM͒, and x-ray photoelectron spectroscopy. It was found that the Mo doping mainly reduces the resistivity level of amorphous GST while the N-doping raises both the resistivity levels of amorphous and crystalline GSTs. XRD and TEM analyses revealed that the element doping stabilizes the amorphous state of GST and suppresses the grain growth in GST films. This resulted in the increase in recrystallization temperature ͑T m ͒ and activation energy ͑E a ͒ of amorphous-to-crystalline phase transition in GST layers, as revealed by the calculation in terms of Kissinger's theory. The results of data fitting into various percolation models and Johnson-Mehl-Avrami analysis indicated the heterogeneous feature of phase transition process in GST layers that the nucleation first occurs at the atmosphere/sample interface and the recrystallization front advances into the interior of sample in a layer-by-layer manner along the direction of surface normal.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.