Abstract:Recently, the mining industry has introduced renewable energy technologies to resolve power supply problems at mines operating in polar regions or other remote areas, and to foster substitute industries, able to benefit from abandoned sites of exhausted mines. However, little attention has been paid to the potential placement of floating photovoltaic (PV) systems operated on mine pit lakes because it was assumed that the topographic characteristics of open-pit mines are unsuitable for installing any type of PV systems. This study analyzed the potential of floating PV systems on a mine pit lake in Korea to break this misconception. Using a fish-eye lens camera and digital elevation models, a shading analysis was performed to identify the area suitable for installing a floating PV system. The layout of the floating PV system was designed in consideration of the optimal tilt angle and array spacing of the PV panels. The System Advisor Model (SAM) by National Renewable Energy Laboratory, USA, was used to conduct energy simulations based on weather data and the system design. The results indicated that the proposed PV system could generate 971.57 MWh/year. The economic analysis (accounting for discount rate and a 20-year operational lifetime) showed that the net present value would be $897,000 USD, and a payback period of about 12.3 years. Therefore, we could know that the economic effect of the floating PV system on the mine pit lake is relatively higher than that of PV systems in the other abandoned mines in Korea. The annual reduction of greenhouse gas emissions was analyzed and found to be 471.21 tCO 2 /year, which is twice the reduction effect achieved by forest restoration of an abandoned mine site. The economic feasibility of a floating PV system on a pit lake of an abandoned mine was thus established, and may be considered an efficient reuse option for abandoned mines.
This paper reviews current trends in wearable device technology, and provides an overview of its prevalent and potential deployments in the mining industry. This review includes the classification of wearable devices with some examples of their utilization in various industrial fields as well as the features of sensors used in wearable devices. Existing applications of wearable device technology to the mining industry are reviewed. In addition, a wearable safety management system for miners and other possible applications are proposed. The findings of this review show that by introducing wearable device technology to mining sites, the safety of mining operations can be enhanced. Therefore, wearable devices should be further used in the mining industry.
Over the past decade, unmanned aerial vehicles (UAVs) have been used in the mining industry for various applications from mineral exploration to mine reclamation. This study aims to review academic papers on the applications of UAVs in mining by classifying the mining process into three phases: exploration, exploitation, and reclamation. Systematic reviews were performed to summarize the results of 65 articles (June 2010 to May 2020) and outline the research trend for applying UAVs in mining. This study found that UAVs are used at mining sites for geological and structural analysis via remote sensing, aerial geophysical survey, topographic surveying, rock slope analysis, working environment analysis, underground surveying, and monitoring of soil, water, ecological restoration, and ground subsidence. This study contributes to the classification of current UAV applications during the mining process as well as the identification of prevalent UAV types, data acquired by sensors, scales of targeted areas, and styles of flying control for the applications of UAVs in mining.
In this study, geographic information system (GIS)-based methods and their applications in solar power system planning and design were reviewed. Three types of GIS-based studies, including those on solar radiation mapping, site evaluation, and potential assessment, were considered to elucidate the role of GISs as problem-solving tools in relation to photovoltaic and concentrated solar power systems for the conversion of solar energy into electricity. The review was performed by classifying previous GIS-based studies into several subtopics according to the complexity of the employed GIS-based methods, the type of solar power conversion technology, or the scale of the study area. Because GISs are appropriate for handling geospatial data related to solar resource and site suitability conditions on various scales, the applications of GIS-based methods in solar power system planning and design could be expanded further.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.